I am an IE&C field engineer with almost 10 years experience in oil and gas industry. My area of focus and interest varies from instrumentation pre- commissioning, up to start-up and maintenance engineer
My last position was Instrument / Electrical Constriction Supervisor ,subcontractor for KCOI ,PSNK,NCOC under SITEK LLP from Kazachstan ; also I was with Dietsmann more than two years in Kazachstan Instrument maintenance area supervisor Main power AGIP KCO ( onshore ) ; In Libya - Instrument commissioning engineer - Waha Oil Company ( onshore )
I just finished a project in Kazakhstan with SITEK LLP and I m looking for a new project.all projects was offshore so I have available certificate of competence OPITO BOSIET . I would appreciate the opportunity to interview with you, for instrument supervisor position.
Please find attached my last resume for your review
I can be reached via email at : or by mobile phone at: (+40) 743 181 345.
In case you do not have any suitable openings at the moment, I would be grateful if you would keep my CV on file for any future possibilities.
Curriculum Vitae
Personales information
First name/ Surname Popescu Marius Catalin
Address Pitesti, Ion P Comaneanu Street , Number 7, Romania
Telephone(s) (+40) 743 181 345
E-mail
Nationality Romanian
Date of birth 01.08.1979
Marital status Married
Childrens two
Work experience
Dates April 2016 May 2017
Occupation Electrical /Instrument Constriction Supervisor
KCOI - Construction Supervisor ( April 2016 September 2016)
PSN Construction Supervisor (November2016 -December 2016)
KARABHATAN Construction Supervisor (January 2017 May 2017)
Main activit้s and responsabilit้s Responsible for
Coordinates constriction activities of electricians and instrumentation teams; be sure that all safety rules are following.
Record any change / modification in the relevant engineering documentations.
Follow QA/QC procedures regarding cables and wirings connections from field to marshalling cabinet
Ensure that works are performed in accordance to the relevant documentation & procedures and all this are respect by vendors.
Supervise activities of field teams that check field instrumentations.
Follow reinstatement activities for flow meter and traps skids in A and D Island
Be sure that all job cards are properly done correctly according NCOC procedures.
Reporting progress status to site manager.
Installing hot heat tracing cables , RTD 's, end caps and power junction boxes for pipe line production compliance with isometric drawings
Be sure that connections inside junctions boxes and local power cabinets for hot heat tracing cables , power cables , RTDs instrument cables are done correctly according procedures
Connecting instrument air tubes for ESV/EDV valves according to hook up with drawings.
Name and address of employer SITEK LLP : Atyrau
Location: Kazakhstan Kazakhstan Caspian Offshore IndustriesLLP
Name project
Under KCOI : Kashagan Development Experimental Program Lancing and receive skid
Under PSN KASTROY: RGI RECYLE LINE PROJECT D ISLAND Depressurization skid and RGI RECYCLE LINE PROJECT PIPERACK 9
Dates January 2012 November 2014
Occupation Area Instrument Supervisor Engineer OGS (OIL,GAS,SULPHUR)
AGIP KCO - Maintenance - Start Up & Operate
Main activities and responsibilities Responsible for
Following, planning and closing in SAP BP, corrective and preventive works order. Update all preventive maintenance activities. Use the maintenance management system to co-ordinate , distribute and execute works and ensure history data is entered and maintained
Supervise the proper execution of preventive , corrective , predictive maintenance activities on field instrumentation such as : ESDV , Control valves , switches automated systems , motor valves and all type of transmitters
Ensuring the provision of adequate resources to carry out the activities in OGS area and Instrumental Workshop , special tools and materials for technicians or additional specialist maintenance support
Ensure that work is carried out in accordance with AKCO HSE policy , companies management of change procedures and work permit system
Report daily activities, provide input to safety meetings and report any defects or deviations to line management. Compiling ,completing and submitting of reports and documentation to the required standards
Coordination and planning of the turnaround activity
Applying Agip KCOs HSE & SD Policies & Management System
Support to improving and changing some design project for field instruments.
Prioritizing activities according safety critical elements
Assist in troubleshooting and analysis of maintenance strategy systems, hardware and software problems. Contribute to defect elimination by participating in Root Cause Analysis studies.
Field instrument, Fire and Gas System ( F&G ) , Vibration Monitoring System ,Flash and Sales Gas Compressors Packages , DCS and ESD system to fixed troubleshooting .
Supervise quality of work done by of the maintenance Contractors (ERSAI, ISKER, ECOS, KIOS, RELAY ZHOLDAS, PSN) and their respect of time scheduling, continually strives to improve plant operability end efficiency.
Managing all the Control and Instrument Protective system maintenance , modifications and documentation activities cost effectively , whilst maintaining the highest level of HSE performance and optimum levels of integrity and reliability within approved budget and availability targets
Checking field instruments according documentations from EDMS , IMIS and EP Plant Engineering & Maintenance DB and improving documents that were send to design engineering department. (Instrument Data Sheet , Control Narrative ,P&ID, Loop Diagram ,Wiring Diagram ,Cable List , Instrument Hook-Ups Drawing )
Checking safety instrument function ( SIF ) according with Safety Integrity Level (SIL)for Fire & Gas System (F&G) and Emergency Shutdown System (ESD)
Knowledge of local and international codes and regulations regarding instrumentation systems and equipment , with commitment to metrology rules
Ordering and completing spare parts for field instruments and DCS and ESD system ( Foxboro , Triconex , Allen Bradley , ABB , Magnetrol , Biffi , Yogogawa , Emerson , Enderss Hauser) using system of Requisition material request .
Name and address of employer Dietsmann LLP : Atyrau
Location: Kazakhstan Eskene West
Name project: Kashagan
Dates January 2010 September 2011
Occupation Commissioning & Start-up Engineer
Main activities and responsibilities Responsible for
Prepare loop check records files for the loop checking activity of each Control System (Honeywell, Siemens, Allan Brantley , Bindley Nevada ), by collecting all required engineering documentation (P&ID-s, loop drawings, instrument data sheets, wiring diagrams , factory instrument calibration certificate) and construction forms ( Cable list , Hook-up drawing ).
Supervise loop checking activities for all control/safety loop of the Central Control System (DCS and ESD).
Follow QA/QC procedures regarding cables and wirings connections from field to marshalling cabinet
Main activities and responsibilities Loop checking in DCS system in accordance with Control Narrative documentations
Ensure that works are performed in accordance to the relevant documentation & procedures and all this are respect by vendors.
Supervise activities of field teams that check field instrumentations.
Monitor progress of the loop checking activities
Keep tracking of the necessary remedial actions; troubleshooting activity.
Main activities and responsibilities Record any change / modification in the relevant engineering documentations.
Ensure that the loop checking forms are signed-off form all parties upon completion of the relevant checks.
Ensuring that all systems and field instrumentations are safety and ready to start
Supervise activities of vendors for check network connections from local
Control panel (PLC s ) and central control room.
Technical assistance for field instrumental equipment.
Name and address of employer J&P (JOANNOU & PARASKEVAIDES ) International Building & Civil , Mechanical and Electrical Engineering Contractors - CYPRUS
Location: Libya (Sahara Desert)
Name project: Faregh II Waha Oil Company Gas Plant
Dates October 2008 September 2009
Occupation Head of Prevention Fire Fighting
Main activities and responsibilities Responsible for assuring the fire prevention on the Arpechim Refinery
Responsible for all fire working permits
Perform walk around
Perform trainings with permanent Arpechim employees Safety DuPont Training Safety Culture Improvement Project
Name and address of employer Falck Fire Services Bucuresti
Location: PETROM - Arpechim Refinery Pitesti
Dates February 2007 October 2008
Occupation Maintenance engineer
Main activities and responsibilities Coordination of the implementation works for emergency shutdown system (HIMA system) having as a subcontractor IMSAT
In Germany, I attended the testing and the acceptance of the Hima systems witch were applied in Arpechim Refinery
Name and address of employer PETROM S.A, ARPECHIM Refinery, 127 Petrochimiştilor Blvd., Piteşti, Romania
Maintenance - Start Up & Operate
Dates December 2006 February 2007
Occupation Maintenance engineer
Main activities and responsibilities In Arpechim Refinery started the overhaul in order to implement the DCS and ESD systems (Honeywell) in RC, CC and DAV plant
Responsible for loop checking, cause-effect diagram and loop tuning
Assuring the configuration for new loops and modification of DCS graphic forms on technologists demand.
Name and address of employer PETROM S.A, ARPECHIM Refinery, 127 Petrochimiştilor Blvd., Piteşti, Romania
Maintenance Department
Dates May 2006 December 2006
Occupation Maintenance engineer
Main activities and responsibilities Implementation of the emergency shutdown system (ESD) in Hydrogen Unit (HPU)
Responsible for checking on the causeeffect diagram
Responsible for loop checking on ONDEO (SIEMENS)
Name and address of employer PETROM S.A, ARPECHIM Refinery, 127 Petrochimiştilor Blvd., Piteşti, Romania
Maintenance Department
Dates September 2005 May 2006
Occupation Maintenance engineer
Main activities and responsibilities Responsible for assuring the permanent maintenance for Vacuum Distillate Hydro-treating Unit (HDV)
Responsible for loop checking, loop tuning on Yokogawa system
Responsible for cause effect diagram Triconex system (ESD)
Name and address of employer PETROM S.A, ARPECHIM, 127 Petrochimiştilor Blvd., Piteşti, Romania
Maintenance Department
Dates January 2005 September 2005
Occupation Maintenance engineer
Main activities and responsibilities Responsible for checking the DCS field instrumentations during the Refinery turnaround
Name and address of employer PETROM S.A, ARPECHIM Refinery, 127 Petrochimiştilor Blvd., Piteşti, Romania
Maintenance Department
Dates From October 2004 to December 2005
Occupation Maintenance engineer
Main activities and responsibilities Trial period
Name and address of employer PETROM S.A, ARPECHIM Refinery, 127 Petrochimiştilor Blvd., Piteşti, Romania
Catalytic Cracking Unit
Education and training
Dates From 2004 to 2006
Title of qualification awarded Masters Degree
Principal subject Computer Applied Electromechanical Systems
Name of organization providing education and training Piteşti University, Faculty of Computers
Dates From 1999 to 2004
Title of qualification awarded Bachelor of Electronics and Electro-mechanics
Name and type of organization providing education and training Piteşti University, Faculty of Electronics and Electro-mechanics
Dates February 2005
Title of qualification awarded Professional Certificates
Principal subjects As 315 Experion PKS Server and C200 Controller
Engineering and Configuration
Name of organization providing education and training Honeywell
Dates September 2005
Title of qualification awarded Certificate of DCS Training Acceptance
Principal subjects Fundamental course of Yokogawa DCS system
Basic understanding of DCS & PRM operation
Basic understanding of DCS & PRM maintenance
Basic procedure for DCS S/W engineering
Name of organization providing education and training Yokogawa Electric Korea (YKO)
Dates October 2005
Title of qualification awarded Professional Certificate
Principal subjects Trusted operations and Maintenance T8064 (ESD)
Name of organization providing education and training ICS Triplex A.P.
Dates May 2006
Title of qualification awarded Certificate
Principal subjects Centum CS3000 Engineering Training
Name of organization providing education and training Yokogawa GesmbH, Vienna
Dates November 2008
Title of qualification awarded Certificate
Principal subjects Prevention courses
Name of organization providing education and training Pitesti ISU Arges
Dates February 2009
Title of qualification awarded Diploma Certified Trainer Safety
Principal subjects Train-the-Trainer Actions Employees Can Take
Name of organization providing education and training E.I. du Pont Nemours and Company
Dates May 2009
Title of qualification awarded Diploma Certified Trainer Safety
Principal subjects Techniques that work for Operations Managers with Audit Training
Name of organization providing education and training E.I. du Pont Nemours and Company
Name of organization providing education and training Drไger Safety Romania SRL
Dates May 2013
Title of qualification awarded SAP Plant Maintenance training course Maintenance Supervisor
Principal subjects Understand the major components of Master Data Management
Learn how to create Notifications
Learn how to Ask for Notification Approval
Learn how to Release and Print a Work Order
Learn how to Post Confirmation of worked hours against a Work Order
Learn how to Close Notifications and Work Orders
Name of organization providing education and training AGIP KCO
Dates Course Data May 2016 Expiry 06 May 2020
Title of qualification awarded OPITO BOSIET certificate of competence
BASIC OFFSHORE SAFETY INDUCTION & EMERGENCY TRAINING
Principal subjects Safety Induction
Helicopter Safety and Escape
Sea Survival and First Aid
Fire fighting and Self Rescue
Basic H2S Training
Learning outcomes of the H2S
Dates
Title of qualification awarded
Principal subjects Course Data May 2016 Expiry 06 March 2017
Offshore Site H2S Insduction
Course Data Dec 2016 Expiry Dec 2017
Onshore Site H2S Insduction
Basic H2S Training
Learning outcomes of the H2S
Learning to use BA apparatus and gas detectors
Technical skills and competences Ability to discover and remedy the defections in short time
Ability to analyze the effects in order to prevent eventual defections
Ability to lead and coach foreign international and national staff
Capacity to integrate himself in a foreign international and national staff
Strong commitment to safety
From Romania, Pite%u015Fti
My last position was Instrument / Electrical Constriction Supervisor ,subcontractor for KCOI ,PSNK,NCOC under SITEK LLP from Kazachstan ; also I was with Dietsmann more than two years in Kazachstan Instrument maintenance area supervisor Main power AGIP KCO ( onshore ) ; In Libya - Instrument commissioning engineer - Waha Oil Company ( onshore )
I just finished a project in Kazakhstan with SITEK LLP and I m looking for a new project.all projects was offshore so I have available certificate of competence OPITO BOSIET . I would appreciate the opportunity to interview with you, for instrument supervisor position.
Please find attached my last resume for your review
I can be reached via email at : or by mobile phone at: (+40) 743 181 345.
In case you do not have any suitable openings at the moment, I would be grateful if you would keep my CV on file for any future possibilities.
Curriculum Vitae
Personales information
First name/ Surname Popescu Marius Catalin
Address Pitesti, Ion P Comaneanu Street , Number 7, Romania
Telephone(s) (+40) 743 181 345
Nationality Romanian
Date of birth 01.08.1979
Marital status Married
Childrens two
Work experience
Dates April 2016 May 2017
Occupation Electrical /Instrument Constriction Supervisor
KCOI - Construction Supervisor ( April 2016 September 2016)
PSN Construction Supervisor (November2016 -December 2016)
KARABHATAN Construction Supervisor (January 2017 May 2017)
Main activit้s and responsabilit้s Responsible for
Coordinates constriction activities of electricians and instrumentation teams; be sure that all safety rules are following.
Record any change / modification in the relevant engineering documentations.
Follow QA/QC procedures regarding cables and wirings connections from field to marshalling cabinet
Ensure that works are performed in accordance to the relevant documentation & procedures and all this are respect by vendors.
Supervise activities of field teams that check field instrumentations.
Follow reinstatement activities for flow meter and traps skids in A and D Island
Be sure that all job cards are properly done correctly according NCOC procedures.
Reporting progress status to site manager.
Installing hot heat tracing cables , RTD 's, end caps and power junction boxes for pipe line production compliance with isometric drawings
Be sure that connections inside junctions boxes and local power cabinets for hot heat tracing cables , power cables , RTDs instrument cables are done correctly according procedures
Connecting instrument air tubes for ESV/EDV valves according to hook up with drawings.
Name and address of employer SITEK LLP : Atyrau
Location: Kazakhstan Kazakhstan Caspian Offshore IndustriesLLP
Name project
Under KCOI : Kashagan Development Experimental Program Lancing and receive skid
Under PSN KASTROY: RGI RECYLE LINE PROJECT D ISLAND Depressurization skid and RGI RECYCLE LINE PROJECT PIPERACK 9
Dates January 2012 November 2014
Occupation Area Instrument Supervisor Engineer OGS (OIL,GAS,SULPHUR)
AGIP KCO - Maintenance - Start Up & Operate
Main activities and responsibilities Responsible for
Following, planning and closing in SAP BP, corrective and preventive works order. Update all preventive maintenance activities. Use the maintenance management system to co-ordinate , distribute and execute works and ensure history data is entered and maintained
Supervise the proper execution of preventive , corrective , predictive maintenance activities on field instrumentation such as : ESDV , Control valves , switches automated systems , motor valves and all type of transmitters
Ensuring the provision of adequate resources to carry out the activities in OGS area and Instrumental Workshop , special tools and materials for technicians or additional specialist maintenance support
Ensure that work is carried out in accordance with AKCO HSE policy , companies management of change procedures and work permit system
Report daily activities, provide input to safety meetings and report any defects or deviations to line management. Compiling ,completing and submitting of reports and documentation to the required standards
Coordination and planning of the turnaround activity
Applying Agip KCOs HSE & SD Policies & Management System
Support to improving and changing some design project for field instruments.
Prioritizing activities according safety critical elements
Assist in troubleshooting and analysis of maintenance strategy systems, hardware and software problems. Contribute to defect elimination by participating in Root Cause Analysis studies.
Field instrument, Fire and Gas System ( F&G ) , Vibration Monitoring System ,Flash and Sales Gas Compressors Packages , DCS and ESD system to fixed troubleshooting .
Supervise quality of work done by of the maintenance Contractors (ERSAI, ISKER, ECOS, KIOS, RELAY ZHOLDAS, PSN) and their respect of time scheduling, continually strives to improve plant operability end efficiency.
Managing all the Control and Instrument Protective system maintenance , modifications and documentation activities cost effectively , whilst maintaining the highest level of HSE performance and optimum levels of integrity and reliability within approved budget and availability targets
Checking field instruments according documentations from EDMS , IMIS and EP Plant Engineering & Maintenance DB and improving documents that were send to design engineering department. (Instrument Data Sheet , Control Narrative ,P&ID, Loop Diagram ,Wiring Diagram ,Cable List , Instrument Hook-Ups Drawing )
Checking safety instrument function ( SIF ) according with Safety Integrity Level (SIL)for Fire & Gas System (F&G) and Emergency Shutdown System (ESD)
Knowledge of local and international codes and regulations regarding instrumentation systems and equipment , with commitment to metrology rules
Ordering and completing spare parts for field instruments and DCS and ESD system ( Foxboro , Triconex , Allen Bradley , ABB , Magnetrol , Biffi , Yogogawa , Emerson , Enderss Hauser) using system of Requisition material request .
Name and address of employer Dietsmann LLP : Atyrau
Location: Kazakhstan Eskene West
Name project: Kashagan
Dates January 2010 September 2011
Occupation Commissioning & Start-up Engineer
Main activities and responsibilities Responsible for
Prepare loop check records files for the loop checking activity of each Control System (Honeywell, Siemens, Allan Brantley , Bindley Nevada ), by collecting all required engineering documentation (P&ID-s, loop drawings, instrument data sheets, wiring diagrams , factory instrument calibration certificate) and construction forms ( Cable list , Hook-up drawing ).
Supervise loop checking activities for all control/safety loop of the Central Control System (DCS and ESD).
Follow QA/QC procedures regarding cables and wirings connections from field to marshalling cabinet
Main activities and responsibilities Loop checking in DCS system in accordance with Control Narrative documentations
Ensure that works are performed in accordance to the relevant documentation & procedures and all this are respect by vendors.
Supervise activities of field teams that check field instrumentations.
Monitor progress of the loop checking activities
Keep tracking of the necessary remedial actions; troubleshooting activity.
Main activities and responsibilities Record any change / modification in the relevant engineering documentations.
Ensure that the loop checking forms are signed-off form all parties upon completion of the relevant checks.
Ensuring that all systems and field instrumentations are safety and ready to start
Supervise activities of vendors for check network connections from local
Control panel (PLC s ) and central control room.
Technical assistance for field instrumental equipment.
Name and address of employer J&P (JOANNOU & PARASKEVAIDES ) International Building & Civil , Mechanical and Electrical Engineering Contractors - CYPRUS
Location: Libya (Sahara Desert)
Name project: Faregh II Waha Oil Company Gas Plant
Dates October 2008 September 2009
Occupation Head of Prevention Fire Fighting
Main activities and responsibilities Responsible for assuring the fire prevention on the Arpechim Refinery
Responsible for all fire working permits
Perform walk around
Perform trainings with permanent Arpechim employees Safety DuPont Training Safety Culture Improvement Project
Name and address of employer Falck Fire Services Bucuresti
Location: PETROM - Arpechim Refinery Pitesti
Dates February 2007 October 2008
Occupation Maintenance engineer
Main activities and responsibilities Coordination of the implementation works for emergency shutdown system (HIMA system) having as a subcontractor IMSAT
In Germany, I attended the testing and the acceptance of the Hima systems witch were applied in Arpechim Refinery
Name and address of employer PETROM S.A, ARPECHIM Refinery, 127 Petrochimiştilor Blvd., Piteşti, Romania
Maintenance - Start Up & Operate
Dates December 2006 February 2007
Occupation Maintenance engineer
Main activities and responsibilities In Arpechim Refinery started the overhaul in order to implement the DCS and ESD systems (Honeywell) in RC, CC and DAV plant
Responsible for loop checking, cause-effect diagram and loop tuning
Assuring the configuration for new loops and modification of DCS graphic forms on technologists demand.
Name and address of employer PETROM S.A, ARPECHIM Refinery, 127 Petrochimiştilor Blvd., Piteşti, Romania
Maintenance Department
Dates May 2006 December 2006
Occupation Maintenance engineer
Main activities and responsibilities Implementation of the emergency shutdown system (ESD) in Hydrogen Unit (HPU)
Responsible for checking on the causeeffect diagram
Responsible for loop checking on ONDEO (SIEMENS)
Name and address of employer PETROM S.A, ARPECHIM Refinery, 127 Petrochimiştilor Blvd., Piteşti, Romania
Maintenance Department
Dates September 2005 May 2006
Occupation Maintenance engineer
Main activities and responsibilities Responsible for assuring the permanent maintenance for Vacuum Distillate Hydro-treating Unit (HDV)
Responsible for loop checking, loop tuning on Yokogawa system
Responsible for cause effect diagram Triconex system (ESD)
Name and address of employer PETROM S.A, ARPECHIM, 127 Petrochimiştilor Blvd., Piteşti, Romania
Maintenance Department
Dates January 2005 September 2005
Occupation Maintenance engineer
Main activities and responsibilities Responsible for checking the DCS field instrumentations during the Refinery turnaround
Name and address of employer PETROM S.A, ARPECHIM Refinery, 127 Petrochimiştilor Blvd., Piteşti, Romania
Maintenance Department
Dates From October 2004 to December 2005
Occupation Maintenance engineer
Main activities and responsibilities Trial period
Name and address of employer PETROM S.A, ARPECHIM Refinery, 127 Petrochimiştilor Blvd., Piteşti, Romania
Catalytic Cracking Unit
Education and training
Dates From 2004 to 2006
Title of qualification awarded Masters Degree
Principal subject Computer Applied Electromechanical Systems
Name of organization providing education and training Piteşti University, Faculty of Computers
Dates From 1999 to 2004
Title of qualification awarded Bachelor of Electronics and Electro-mechanics
Name and type of organization providing education and training Piteşti University, Faculty of Electronics and Electro-mechanics
Dates February 2005
Title of qualification awarded Professional Certificates
Principal subjects As 315 Experion PKS Server and C200 Controller
Engineering and Configuration
Name of organization providing education and training Honeywell
Dates September 2005
Title of qualification awarded Certificate of DCS Training Acceptance
Principal subjects Fundamental course of Yokogawa DCS system
Basic understanding of DCS & PRM operation
Basic understanding of DCS & PRM maintenance
Basic procedure for DCS S/W engineering
Name of organization providing education and training Yokogawa Electric Korea (YKO)
Dates October 2005
Title of qualification awarded Professional Certificate
Principal subjects Trusted operations and Maintenance T8064 (ESD)
Name of organization providing education and training ICS Triplex A.P.
Dates May 2006
Title of qualification awarded Certificate
Principal subjects Centum CS3000 Engineering Training
Name of organization providing education and training Yokogawa GesmbH, Vienna
Dates November 2008
Title of qualification awarded Certificate
Principal subjects Prevention courses
Name of organization providing education and training Pitesti ISU Arges
Dates February 2009
Title of qualification awarded Diploma Certified Trainer Safety
Principal subjects Train-the-Trainer Actions Employees Can Take
Name of organization providing education and training E.I. du Pont Nemours and Company
Dates May 2009
Title of qualification awarded Diploma Certified Trainer Safety
Principal subjects Techniques that work for Operations Managers with Audit Training
Name of organization providing education and training E.I. du Pont Nemours and Company
Name of organization providing education and training Drไger Safety Romania SRL
Dates May 2013
Title of qualification awarded SAP Plant Maintenance training course Maintenance Supervisor
Principal subjects Understand the major components of Master Data Management
Learn how to create Notifications
Learn how to Ask for Notification Approval
Learn how to Release and Print a Work Order
Learn how to Post Confirmation of worked hours against a Work Order
Learn how to Close Notifications and Work Orders
Name of organization providing education and training AGIP KCO
Dates Course Data May 2016 Expiry 06 May 2020
Title of qualification awarded OPITO BOSIET certificate of competence
BASIC OFFSHORE SAFETY INDUCTION & EMERGENCY TRAINING
Principal subjects Safety Induction
Helicopter Safety and Escape
Sea Survival and First Aid
Fire fighting and Self Rescue
Basic H2S Training
Learning outcomes of the H2S
Dates
Title of qualification awarded
Principal subjects Course Data May 2016 Expiry 06 March 2017
Offshore Site H2S Insduction
Course Data Dec 2016 Expiry Dec 2017
Onshore Site H2S Insduction
Basic H2S Training
Learning outcomes of the H2S
Learning to use BA apparatus and gas detectors
Technical skills and competences Ability to discover and remedy the defections in short time
Ability to analyze the effects in order to prevent eventual defections
Ability to lead and coach foreign international and national staff
Capacity to integrate himself in a foreign international and national staff
Strong commitment to safety
From Romania, Pite%u015Fti
Community Support and Knowledge-base on business, career and organisational prospects and issues - Register and Log In to CiteHR and post your query, download formats and be part of a fostered community of professionals.