No Tags Found!


raghuvaran chakkaravarthy
497

Dear Penney, Thanks for sharing a wonderful messages. . . Keep on sharing. . . Note: Due to network problem i cant upload video/files i will add some more for us keep on watching. . .
From United States, Fpo
tgpenney@gmail.com
11

Hand and power tools are integral to the efficiency of our workplaces but they are also extremely dangerous and account for hundreds of thousands of injuries every year. Safe use of these tools is imperative for a healthy and productive workplace. Here is a list of things never to do with a hand or power tool.

Never start work without scanning your work area for possible hazards. Make sure that the cord won’t get caught on any materials and that the work area is clean. A clean and organized work area is the first step to efficiency and safety.

Never work without personal protective equipment. Goggles, gloves and other PPE save many eyes and hands every year. Never work without them!

Never forget to secure the materials you are working on especially with power tools. Kick-back is when a power tool sends its energy away from cutting or punching and either violently into the material or back towards the tool. Either way it can cause serious injury.

Never use a power tool with one hand. Kick-back and slipping will occur eventually and could cause serious injury.

Never use a hammer or screwdriver without first “seating” the nail or screw. Tap the nail or screw in with a hammer and get your hand away from the nail or screw. Never use full force with your hand still in the area.

Never use a screwdriver that has a blade that is too big or small for the job. Always fit the blade to the screw. It will decrease your chances for injury exponentially.

Never use a hammer to turn a wrench or pliers. Inevitably the hammer will bounce off and hit you or someone else.

Never forget to sharpen your blades. Hand knives and power saws are safer when they are sharp. It reduces kick-back and makes every operation go smoother.

Here are a few simple metal-specific rules to observe to make your metalcrafting experiences safe and sound:

• Don't grasp metal pieces tightly. A light grip will prevent cuts and slices.

• Never run your fingers along the raw edge.

• When using a tin snip or other cutting tool, keep the cutter deep in the cut as you move along. Avoid making short cuts and creating small burrs along the cut line.

• Beginners might want to wear gloves for protection, but you can get a better feel for metalcraft without them, so as soon as you're familiar with the tools and materials you'll probably want to work bare-handed. Start your child out with gloves and when she appears to be ready, let her try working without them.

• Whenever possible, use a well-mounted vice to grip your piece while you're working on it. This may not always be practical, but consider it whenever you can. Use a rag or piece of scrap leather to cushion the metal and keep from marring it.

• Don't brush scraps of metal into the trash with your hands. Always use a brush or even a piece of stiff cardboard to push them along.

• Don't rush yourself. Take your time and you'll be less likely to injure yourself.

• Work with adequate light. If possible, use both natural and artificial light. Metal shines, which makes it difficult to see clearly under certain lighting conditions.

By keeping the following 10 safety issues in mind, it is possible to work satisfactorily and safely with power tools.

1. Safety glasses: These prevent dust, debris, wood shavings, shards from fiberglass, etc from getting into the eyes. Safety glasses are one of the most basic pieces of safety equipment that must be used when working with power tools.

2. Protection for the ears: Power tools can generate a lot of noise, which may sound louder in the cloistered environment of a workshop; in order to minimize damage to the ears, it is advisable to wear earplugs.

3. Knowing the right tools for the job: It is important to know the right tools for the job in order to avoid injury to oneself and damage to the materials. To this end, it is advisable to thoroughly read the instruction manuals provided with the equipment and get familiar with the recommended safety precautions.

4. Correct method of using tools: Tools should not be carried by their cords; tools that are not in use should be disconnected; and while handling a tool connected to a power source, fingers should be kept away from the on/off switch.

5. The right clothes: Long hair should be tied and loose clothing should be avoided. Ideally, clothing that covers the entire body should be worn and heavy gloves should be used in order to avoid sharp implements and splinters from hurting the hands. Masks prevent inhalation of harmful minute particles of the material that is being worked upon. Steel-toed work boots and hard hats can also be worn.

6. Tool inspection: Power tools should not be employed in wet environments and should never be dipped in water; they should be checked periodically for exposed wiring, damaged plugs, and loose plug pins. Nicked cords can be taped but if a cut appears to be deep, a cord should be replaced. Tools that are damaged or those that sound and feel different when used should be checked and repaired.

7. Cleanliness in the work area: This should be maintained because accumulated dust particles in the air can ignite with a spark. Of course, flammable liquids should be kept covered and away from the place where power tools are being used. An uncluttered work area also makes it easy to maneuver the power tool; often distractions caused by a tangled cord can result in an accident.

8. Care with particular tools: Miter saws and table saws should be used with a quick-release clamp and a wood push-through, respectively. Extra care should be taken while using nail guns and power belt sanders.

9. Keep tools in place: Power tools should be returned to their cabinets after use to prevent them from being used by an unauthorized and incapable person.

10. Lighting: It is important to use proper lighting while working with power tools, particularly when working in the basement and garage where lighting may not be satisfactory.

http://www.google.ca/url?sa=t&source...F54VPZN0iTSIpQ

From Canada, Calgary
tgpenney@gmail.com
11

How to Select the Right Concrete Saw Blades For Making

How to Select the Right Concrete Saw Blades For Making Professional Cuts in Concrete

Your investment in a well-engineered concrete saw blade is well justified by productivity gains, reduced downtime, stunningly smooth surface and long service life. Whether you are enhancing concrete with decorative scoring, sawing control joints, or cutting or replacing it, you can’t think of doing the job without a top-quality saw blade. Like an expert chef needs assortments of knives to prepare various gourmet specialties, you will need types of blades to perform all the cutting tasks.

Have a look at the tips for reducing annual maintenance costs, less dusting and enhancing an aesthetic value of your floor.

Try to match the blade as closely as possible

Try to match the blade as closely as possible to the material you are going to cut. For maximum cutting speed and blade life, you must know the size and hardness of the materials you are going to cut and its compressive strength.

Hardness of the Floor

Hardness of the floor will help you determine the operating speed you will need to complete the task.

Task that you are going to perform

For drilling or coring functions, determine how large a hole you want to drill. Then observe tools’ maximum capacities and ranges.

Accessories easily available and easy to switch.

Look for the versatile tool that has a characteristic of easily interchangeable accessories.

Having a good understanding of concrete

Being able to differentiate between hard and soft concrete is paramount before you even consider operating the machine. On hard one you need a soft bonded diamond while on soft one you need a hard bonded diamond.

Go with a light weight portable diamond saw blade

Go with a light weight portable diamond saw blade, if you want some freedom of movement or want to perform the job hassle-free. Prefer a cordless tool if you are always on the plan to move.

High performance finishing tool.

While concrete finishing tools don’t vary in design from a manufacturer to a manufacturer, but they can vary in quality. Always go for the finishing tool that is high in performance

The size of the saw that will be needed also depends on the nature of job.

One factor is whether the application is a heavy construction job or if it is a job that needs to be done around the home. The saws, with their diamond blades are able to cut through large pieces of concrete in a short period of time and help make even the largest concrete cutting applications easier and less time consuming.

Understanding these tips and knowing, which finishing tools work best should be the key factors guiding your purchasing decision. To get the better return on investment, it is also important to hone your finishing skills so to wield the concrete saw tools properly.

From Canada, Calgary
tgpenney@gmail.com
11

The Keys to Sharing information
Is just that sharing, regardless of your company or what you do for your employer every employee from management to the worker has something to share
So regardless if its a question one of us could answer to a training program or poster safety comes in many phases and no one item or way is the best
SO THE KEY IS SHARE YOUR IDEAS-- SHARE YOUR MATERIALS--SHARE YOUR QUESTIONS OR EXPERT ADVISE REMEMBERING ONE THING YOUR SHARING OF MATERIALS COULD SAVE ANOTHER PERSON LIFE --- LEARNING IS A LIFE LONG EFFORT
tp

From Canada, Calgary
Attached Files (Download Requires Membership)
File Type: jpg 7_safety_habits_situational_awareness.jpg (25.8 KB, 345 views)

tgpenney@gmail.com
11

Ok Ill lead by example here are a few things I put together for today some maybe useful to some and useless to others. It maybe not of interest today but in three days someone may ask that question
A safety library is like family you may not see or talk to them every day but when you need a Uncle or Aunts advise on something or knowledge you know where to find them
HOW DOES YOUR SAFETY FAMILY ARE THEY CLOSE TO YOU WHEN YOU NEED THEM!
So I have lead in good faith my material that I wrote now what have you got, either by something you have read, or wrote or even a simple question that many of our good folks could answer for you
LET ME SEE WHAT YOUVE GOT --------- PLEASE!

From Canada, Calgary
Attached Files (Download Requires Membership)
File Type: doc Lets talk Blood borne Pathogen Language.doc (70.5 KB, 312 views)
File Type: doc Lets talk fire safety language.doc (96.0 KB, 466 views)
File Type: doc Lets talk LOTO Language like others.doc (52.5 KB, 390 views)
File Type: doc Lets talk Walking and Working Surface Language.doc (121.0 KB, 313 views)
File Type: doc Lets talk PPE Proper Language.doc (92.0 KB, 438 views)

raghuvaran chakkaravarthy
497

Dear Penney,
Thanks a lot for sharing your expertise with us. . .
Sharing knowledge is not about giving people something, or getting something from them. That is only valid for information sharing. Sharing knowledge occurs when people are genuinely interested in helping one another develop new capacities for action; it is about creating learning processes.
Keep on sharing. . .
Again thanks Mr.Penney. . .

From United States, Fpo
raghuvaran chakkaravarthy
497

Dear all,
Another one from side funny safety video.
“In today's environment, hoarding knowledge ultimately erodes your power. If you know something very important, the way to get power is by actually sharing it.”
Keep on sharing. . .

From United States, Fpo
Attached Files (Download Requires Membership)
File Type: zip 911 Call.zip (3.49 MB, 395 views)

tgpenney@gmail.com
11

Couldnt agree with you more my friend By the way did I answer Mr.abhay question you sent me ok plus all the power point training I sent
From Canada, Calgary
tgpenney@gmail.com
11

We talk a mean picture

A picture of incidents, reports and inspections, or injuries and cause of injuries or best business practices to IRP ( Industry Recognized Practices) from laws to regulatory reviews and findings

What were talking about is people in work environments, but we too need time to smile, laught and wonder out loud ( how did that guy live so long with that kind of safety attitude). Well even in Britian they have a TV serious on it similar to the Napo ones they have out with real people and event ( or at least for the TV)

Here is laugh at my exspense--- ok maybe two or three

http://www.safestart-safetrack.com/G...urInSafety.ppt

a little laugh about safety without the blood

http://www.google.ca/url?sa=t&source...IBAjCNHP7JqWXw

http://www.google.ca/url?sa=t&source...HbfivDswaF2Kgg

Safety is First - Egyptian Style #humour - MaxQ8's Posterous

Safety Geeks: SVI Episode 4 Hot Poses and Sh** from Pith-e Productions

Safety Geeks: SVI Episode 4 Hot Poses and Sh** from Pith-e Productions

Literal Safety Dance - CollegeHumor video

YouTube - Safety At Work Awards

YouTube - Safety Geeks : SVI Pilot Episode

YouTube - Safety Starts with Me!

YouTube - How the Heck am I Still Here?

YouTube - Safety Geeks Episode 7 S1 Ep7 Investigation

YouTube - Very Funny Stupid Signs

And Canadas all time safety guy

Red Green

Seatbelt Mods | iLaugh.com

From Canada, Calgary
tgpenney@gmail.com
11

GENERAL POWER SAW TIPS

Never look away from your work when operating a power saw.

When beginning, let the saw reach full speed before cutting and support the work firmly so it won't shift.

If the saw stalls, switch off the power and unplug the tool before trying to restart it.

Stop working and turn off the power saw you are working with if distracted by something or someone

Never use your hands to clear the scraps from a sawing worktable. Instead, use a long stick

When working with metal, secure the metal materials with clamps or in a machinist's vise to keep it from moving.

TOOL SPECIFIC TIPS

Table Saws:

Adjust the table saw blade to project about 1/8 inch above the wood.

Make certain the work piece is out of contact with the blade when starting or stopping the saw.

Keep the body out of the way. Use a push stick when ripping narrow strips.

Lower the saw blade below the table top when work is finished.

Radial Arm Saws:

When cross-cutting wood, lay the stock solidly on the table and against the back guide. The saw blade should rotate downward as viewed by the operator. Pull the saw with one hand while the stock is held with the other hand.

Never reach across the line of cut.

When making miter cuts, secure the locking devices to prevent the saw from changing angles or digging in.

Return the saw to the rear position after completing a cut.



Band Saws:

Keep the saw blade set evenly and with the correct tension. Push the stock through the blade with the hands on both sides of the line of cut.

Hand-Held Circular Saws:

Do not work in wet areas unless standing on a dry surface and make certain the saw is properly grounded. Do not clamp or wedge the

guard in the open position. Keep your finger off the trigger when carrying the saw. Do not cut the power cord. Wait until the blade stops before laying down the

saw. When finished, unplug the saw and put it out of the reach of children.

Saber Saws:

Select the proper blade for the job. Make sure it is sharp, undamaged and securely tightened in place. Do not turn on the saw when the blade is in

contact with the work piece. Hold the saw firmly with one hand and steady the work with the other. Keep your hand and other objects clear of the blade.

http://uvm.edu <link updated to site home> safe/sld033.htm

Portable Circular Saw Safety Precautions

Always wear safety goggles or safety glasses with side shields complying with the current national standard and a full face shield when needed. Use a dust mask in dusty work conditions. Wear hearing protection during extended periods of operation.

Don't wear loose clothing, jewelry, or dangling objects, including long hair, that may catch in rotating parts or accessories

Don’t use a circular saw that is too heavy for you to easily control

Be sure the switch actuates properly. It should turn the tool on and return to the off position after release.

Use sharp blades. Dull blades cause binding, stalling and possible kickback,

Use the correct blade for the application. Check this carefully. Does it have the proper size and shape arbor hole? Is the speed marked on the blade at least as high as the no-load RPM on the saw's nameplate?

Is the blade guard working? Check for proper operation before each cut. Check often to ensure that guards return to their normal position quickly. If a guard seems slow to return or hangs up, repair or adjust it immediately. Never defeat the guard to expose the blade by, for example tying it back or removing it.

Before starting a circular saw, be sure the power cord and extension cord are out of the blade path and are long enough to freely complete the cut. Keep aware of the cord location. A sudden jerk or puling on the cord can cause loss of control of the saw.

For maximum control, hold the saw firmly with both hands after securing the work piece. Clamp work pieces. Check frequently to be sure clamps remain secure.

Avoid cutting small pieces that cant be properly secured and material on which the saw show can't properly rest.

When you start the saw, allow the blade to reach full speed before contacting the workplace.

When making a partial cut, or if power is interrupted, release the trigger immediately and don't remove the saw until the blade has come to a complete stop.

Portable Circular Saws

www.cdc.gov/niosh/nasd/docs/oa05000.html

All portable, power-driven circular saws having a blade diameter greater than two inches must be equipped with guards. The upper guard must cover the saw to the

depth of the teeth. The lower guard must also cover the saw to the depth of the teeth, except for the minimum arc required to allow proper retraction and contact

with the work. When the tool is withdrawn from the work, the lower guard must automatically and instantly return to the covering position.

Switches and Controls

www.cdc.gov/niosh/nasd/docs/oa05000.html

All hand-held powered circular saws having a blade diameter greater than two inches must be equipped with a constant pressure switch or control that will shut off

the power when the pressure is released.

Miter Box Saws and Chop Saws

http://uvm.edu <link updated to site home>

Stay alert to keeping hands and fingers away from the blades path as it has a downward cutting motion

Be sure all guards are in place and working. If a guard seems slow to return to its normal position adjust or repair it immediately

Use only recommended size and RPM rated blades

When installing or changing a blade, be sure the blade and related washers and fasteners are correctly positioned and secured on the saw arbor

From Canada, Calgary
Community Support and Knowledge-base on business, career and organisational prospects and issues - Register and Log In to CiteHR and post your query, download formats and be part of a fostered community of professionals.






Contact Us Privacy Policy Disclaimer Terms Of Service

All rights reserved @ 2024 CiteHR ®

All Copyright And Trademarks in Posts Held By Respective Owners.