Dear Seniors, could anyone provide me with some points to formulate safety objectives for this year? My site involves general road maintenance, and our company adheres to OSHA's 18000.
Thanks & Regards,
Narasimhan.G.
From Kuwait, Kuwait
Acknowledge(0)
Amend(0)
7Thanks & Regards,
Narasimhan.G.
From Kuwait, Kuwait
Acknowledge(0)Amend(0)
The objectives are to be taken from Hazard Identification and Risk Assessment results. However, some of the common objectives that can be pursued are as follows:
1. Reduction in Accident Frequency rate from ---- to ----
2. Reduction in accident severity rate from ---- to ----
3. Reduction in noise from -- dBA to ---- (in case noise exposure is beyond acceptable levels)
4. Training for employees --- mandays per employee per year
5. Road safety training for communities --- number of training programs
6. Display of posters on defensive driving
7. Increase in employee participation (e.g., near-miss reporting, involvement in competitions, safety suggestions, etc.)
These are a few suggestions I can offer. You can also wait for input from other members.
Thanks & Regards,
Sudhir
From India, Vadodara
Acknowledge(0)Amend(0)
1. Reduction in Accident Frequency rate from ---- to ----
2. Reduction in accident severity rate from ---- to ----
3. Reduction in noise from -- dBA to ---- (in case noise exposure is beyond acceptable levels)
4. Training for employees --- mandays per employee per year
5. Road safety training for communities --- number of training programs
6. Display of posters on defensive driving
7. Increase in employee participation (e.g., near-miss reporting, involvement in competitions, safety suggestions, etc.)
These are a few suggestions I can offer. You can also wait for input from other members.
Thanks & Regards,
Sudhir
From India, Vadodara
Acknowledge(0)Amend(0)
Dear Sudhir sir, Thanks for your reply, if possible please help me to form risk assessment for the general maintenance of road jobs. Thank & Regards, Narasimhan
From Kuwait, Kuwait
Acknowledge(0)Amend(0)
From Kuwait, Kuwait
Acknowledge(0)Amend(0)
Dear Narasimhan,
Hazards in Road Maintenance
Generally, road maintenance would have the following hazards:
If the Roads are Asphalt Concrete:
1. Exposure to asphalt fumes
2. Handling hot asphalt concrete
3. Crash injuries while road rollers compress the concrete
4. Entry into confined spaces if there are underground tunnel crossings
If the Roads are Cement Concrete:
1. Breaking concrete - Exposure to noise
2. Hazards associated with cement mixing (different for automatic mixing and manual mixing)
3. Exposure to wet concrete for a longer time
4. Possibility of white finger problem while using vibrators, etc.
If you need any specific help, please elaborate on your working conditions, preferably with photographs.
Thanks & Regards,
Sudhir
From India, Vadodara
Acknowledge(0)Amend(0)
Hazards in Road Maintenance
Generally, road maintenance would have the following hazards:
If the Roads are Asphalt Concrete:
1. Exposure to asphalt fumes
2. Handling hot asphalt concrete
3. Crash injuries while road rollers compress the concrete
4. Entry into confined spaces if there are underground tunnel crossings
If the Roads are Cement Concrete:
1. Breaking concrete - Exposure to noise
2. Hazards associated with cement mixing (different for automatic mixing and manual mixing)
3. Exposure to wet concrete for a longer time
4. Possibility of white finger problem while using vibrators, etc.
If you need any specific help, please elaborate on your working conditions, preferably with photographs.
Thanks & Regards,
Sudhir
From India, Vadodara
Acknowledge(0)Amend(0)
Dear Mr. Nahasimha,
Just to build upon the above suggestions from our seniors, the objectives may include:
1. Reinforce HAZARD CONTROL measures on (plant operation, side road work, tar placing, etc.).
2. Establish PROCEDURES for bridge repairs.
3. Consolidate EMERGENCY RESPONSE PLAN for roadside emergencies.
4. Reduce accident risk associated with TRANSPORTATION of materials and VEHICLE MOVEMENTS on plants.
5. Design and implement a capacity-building program to (specific details).
6. Conduct task-based RISK ANALYSIS for key tasks (name them) in plant operation.
7. Consolidate NETWORKING between contractors, clients, and other players in the industry.
Regards and best of luck,
Ajay
Mauritius
From Mauritius, Vacoas
Acknowledge(0)Amend(0)
Just to build upon the above suggestions from our seniors, the objectives may include:
1. Reinforce HAZARD CONTROL measures on (plant operation, side road work, tar placing, etc.).
2. Establish PROCEDURES for bridge repairs.
3. Consolidate EMERGENCY RESPONSE PLAN for roadside emergencies.
4. Reduce accident risk associated with TRANSPORTATION of materials and VEHICLE MOVEMENTS on plants.
5. Design and implement a capacity-building program to (specific details).
6. Conduct task-based RISK ANALYSIS for key tasks (name them) in plant operation.
7. Consolidate NETWORKING between contractors, clients, and other players in the industry.
Regards and best of luck,
Ajay
Mauritius
From Mauritius, Vacoas
Acknowledge(0)Amend(0)CiteHR is an AI-augmented HR knowledge and collaboration platform, enabling HR professionals to solve real-world challenges, validate decisions, and stay ahead through collective intelligence and machine-enhanced guidance. Join Our Platform.
Process safety Risk assessment Training.pdf
Road safety policy.zip
Road Safety.pps