Dear All, Is there any general safety checklist for purchasing of new equipments like Industrial reactors, centrifuge , Condenser , Tray dryer , FBD , Crystalizer etc. kindly post. Regards, Abhay
From India, Mumbai
Acknowledge(0)
Amend(0)
52From India, Mumbai
Acknowledge(0)Amend(0)
so many views ...... No Reply ??? I request seniors in safety field to help in this matter. Regards, Abhay
From India, Mumbai
Acknowledge(0)Amend(0)
From India, Mumbai
Acknowledge(0)Amend(0)
Dear Abhay, if you purchase any equipment like a crane or forklift, you should check the operation, maintenance, and safety manuals from your side (safety department). There is no checklist for new equipment. I don't have an idea about industrial reactors, centrifuges, condensers, tray dryers, FBD, crystallizers, etc., and how they are chosen or selected for chemical industries. Wait for senior's advice or commands.
Thanks & be safe,
Raghu
From United States, Fpo
Acknowledge(0)Amend(0)
Thanks & be safe,
Raghu
From United States, Fpo
Acknowledge(0)Amend(0)
Dear Abhay, it is essential for your managers, engineers, and safety personnel to incorporate the safety features as needed by your organization. The required safety features will differ from machine to machine. However, for your guidance, I am attaching two checklists which may be suitably modified to meet your requirements. Kindly confirm if these suit your needs.
Regards,
Kesava Pillai
From India, Kollam
Acknowledge(1)
Amend(0)
Regards,
Kesava Pillai
From India, Kollam
Acknowledge(1)Amend(0)
CHECKLIST B
What do I do when I have bought new machinery?
1. Check that it has CE marking (where necessary) and ask for a copy of the EC Declaration of Conformity if you have not been given one.
2. Check that the supplier has explained what the machinery is designed to be used for and what it cannot be used for (unless this is off-the-shelf machinery).
3. Make sure a manual has been supplied which includes instructions for safe use, assembly, installation, commissioning, safe handling, adjustment, and maintenance.
4. Make sure the instruction manual is written in English. (The maintenance instructions may, however, be written in another language if specialized staff from the manufacturer or supplier will carry out maintenance).
5. Make sure information has been provided about any remaining risks from the machine, and the precautions you need to take to deal with them. These may include electrical, hydraulic, pneumatic, stored energy, thermal, radiation, or health hazards.
6. Check that data about noise and vibration levels have been provided and, where necessary, explained to you.
7. Ensure that any warning signs are visible and easy to understand.
8. For a complex or custom-built machine, arrange for a trial run so you can be shown the safety features and how they work.
9. Check to see if you think the machine is safe.
10. Make sure any early concerns about the safety of the machine are reported to the supplier.
REMEMBER
Never assume that machinery is safe just because it has CE marking.
Regards,
Kesava Pillai
From India, Kollam
Acknowledge(2)Amend(0)
What do I do when I have bought new machinery?
1. Check that it has CE marking (where necessary) and ask for a copy of the EC Declaration of Conformity if you have not been given one.
2. Check that the supplier has explained what the machinery is designed to be used for and what it cannot be used for (unless this is off-the-shelf machinery).
3. Make sure a manual has been supplied which includes instructions for safe use, assembly, installation, commissioning, safe handling, adjustment, and maintenance.
4. Make sure the instruction manual is written in English. (The maintenance instructions may, however, be written in another language if specialized staff from the manufacturer or supplier will carry out maintenance).
5. Make sure information has been provided about any remaining risks from the machine, and the precautions you need to take to deal with them. These may include electrical, hydraulic, pneumatic, stored energy, thermal, radiation, or health hazards.
6. Check that data about noise and vibration levels have been provided and, where necessary, explained to you.
7. Ensure that any warning signs are visible and easy to understand.
8. For a complex or custom-built machine, arrange for a trial run so you can be shown the safety features and how they work.
9. Check to see if you think the machine is safe.
10. Make sure any early concerns about the safety of the machine are reported to the supplier.
REMEMBER
Never assume that machinery is safe just because it has CE marking.
Regards,
Kesava Pillai
From India, Kollam
Acknowledge(2)Amend(0)CiteHR is an AI-augmented HR knowledge and collaboration platform, enabling HR professionals to solve real-world challenges, validate decisions, and stay ahead through collective intelligence and machine-enhanced guidance. Join Our Platform.
SAFETY DETAILS AND CHECKLIST.zip
Internal Safety Checklist.xls