vviji75
92

Dear all
We are having a 200MT crawler crane with lattice boom at site. There was a 4 fall rope in the crane. Now they extended the boom with 2 fall rope. My doubt is
1. Whether the load chart is mentioning only boom capacity?
2. If yes then how to find rope capacity?
crane operator is telling that load chart value only for boom angle and it's capacity. Rope is 28mm. Don't know what kind of rope exactly and he is telling 14 MT capacity per fall.
Pls reply.
Regards
Vijay

From India, Bangalore
raghuvaran chakkaravarthy
497

Dear Vijay,
What i suggest to you please check crane owner's manual it should be addressed on owner's maual.
Note: Most of all our members on New year leave they will help you as soon they back.
Keep on touch. . .

From United States, Fpo
vviji75
92

Dear all Till date there is 131 views on this thread. But no reply. No one don’t want to share their knowledge? Vijay
From India, Bangalore
pon1965
604

As said by Raghu, carefully check the load chart and the No. of falls for the capacity. Sometimes, the Foremen go by shortcut method of reducing the falls to save the time of lift. Are u talking about fly jib? Flyjib normally with single rope fall with ball hook for such cranes.
Pon

From India, Lucknow
ashok2012
As per ur description, definitely there is a chance of reduction of SWL if fall is reduced to 2 from 4. But in this case u have to check the breaking strength of the rope bcz during designing of crane SWL, breaking strength of the rope used to consider. So normal SWL of the rope for 28mm if u consider then u will not get the real figure. Also please check the crane manual that for 250 Ton SWL, what is the no. of fall as per manufacturer. Then also u may get an idea. U will not get such details from the load chart, u have to consult with the crane manual. Hope this will clear ur doubts.

..

Also u check the type of rope i.e whether it is locked coil rope or non-spinning rope or any special type. For such kind of special rope which used to use in the crane, the SWL will be more than (may be double) as per the calculation of 8dsquare. All these details u will get from manual. If manual is not there, then there will be problem to come to a safe conclusion. But definitely as per the operator u can not take it granted that nothing will happen.

Regard

ASHOK KUMAR

From Saudi Arabia
raghuvaran chakkaravarthy
497

Dear Vijay, Mr.Pon & Mr.Ashok given a answer for your query let us know, , , we will help you Thanks for yur inputs Mr.pon and Mr.Ashok Keep on sharing. . .
From United States, Fpo
vviji75
92

Dear all
Thanks for your valuable suggestions. I don't have manual for the particular crane. Only load chart is there. No of falls in the crane is not mentioned in that chart. I found type of the rope and calculated SWL.
SWL is mentioned in load chart incorporate with boom angle and work radius. My doubt is whether that SWL is only for boom capacity or include hoisting rope? As i don't have crane manual, i couldn't find the answer.
Regards
Vijay

From India, Bangalore
dipil
713

Dear Vijay
SWL mentioning in the Load Chart is always considering the hoisting rope also... No need to get further confuse...
Also did you know the concept of Capacity Lifting?
First of all we should not encourage the use of cranes without SLI installed... If no SLI you should allow to lift the 50% Capacity Lifting only... Means if the Load Chart is showing a lifting capacity of 10 Ton, you may suggest to lift upto 5 Ton...

From India
johnbaby903
Hi, How to calculate the Wire rope SWL ? 8d square ? 1 Inch Wire Left hand Langs Lay Rope Grade 1960 N/mm
From United Arab Emirates, Abu Dhabi
Community Support and Knowledge-base on business, career and organisational prospects and issues - Register and Log In to CiteHR and post your query, download formats and be part of a fostered community of professionals.





Contact Us Privacy Policy Disclaimer Terms Of Service

All rights reserved @ 2024 CiteHR ®

All Copyright And Trademarks in Posts Held By Respective Owners.