Dear All,
As per ANSI Z49.1:2005, Oxygen Gas Cylinders in storage shall be kept at a safe distance of 6.1 meters from combustible gas cylinders.
According to the Gas Cylinder Rules 2004, Chapter 2, General Provisions, Section 21: Storage of cylinders: Cylinders containing flammable gases and toxic gases shall be kept separated from each other and from cylinders containing other types of gases by an adequate distance or by a suitable partition wall.
Gas Cylinder Rules 2004 do not specify the exact distance required, and both regulations mentioned above pertain to the storage of gas cylinders only.
Questions on Safe Distances for Gas Cylinders
1. What should be the safe distance between fuel and oxygen during storage as per statutes in India? Which is the latest applicable Act/Rule in India regarding the same?
2. What should be the safe distance while transporting fuel and oxygen as per statutes in India? Is transporting them in the same trolley safe or not?
3. What should be the safe distance between fuel and oxygen during use as per statutes in India?
I request clarification on these topics. If you do not have updates on Indian statutes, please provide information based on any other relevant legalizations.
From India
As per ANSI Z49.1:2005, Oxygen Gas Cylinders in storage shall be kept at a safe distance of 6.1 meters from combustible gas cylinders.
According to the Gas Cylinder Rules 2004, Chapter 2, General Provisions, Section 21: Storage of cylinders: Cylinders containing flammable gases and toxic gases shall be kept separated from each other and from cylinders containing other types of gases by an adequate distance or by a suitable partition wall.
Gas Cylinder Rules 2004 do not specify the exact distance required, and both regulations mentioned above pertain to the storage of gas cylinders only.
Questions on Safe Distances for Gas Cylinders
1. What should be the safe distance between fuel and oxygen during storage as per statutes in India? Which is the latest applicable Act/Rule in India regarding the same?
2. What should be the safe distance while transporting fuel and oxygen as per statutes in India? Is transporting them in the same trolley safe or not?
3. What should be the safe distance between fuel and oxygen during use as per statutes in India?
I request clarification on these topics. If you do not have updates on Indian statutes, please provide information based on any other relevant legalizations.
From India
Dear All , Pl. come up with suggestion for the above with the help of Seniors who are familier with rules & regulations . Regards, Abhay
From India, Mumbai
From India, Mumbai
I am attaching h/w NFPA - 55 which I received from a friend. The requirements related to distance to be observed between various type of gases is mentioned on Page No. 9 (Table 2-1.5)
From India, Coimbatore
From India, Coimbatore
Storage and Transportation of Fuel and Oxygen Cylinders
1. While storing, a 10-foot distance shall be maintained between fuel and oxygen cylinders.
2. NEVER KEEP FUEL & OXYGEN IN THE SAME VEHICLE FOR TRANSPORTATION. So, no question of safe distance arises. It is not safe to transfer fuel & oxygen cylinders in the same trolley. A trolley designed for two cylinders shall be used to keep both the oxygen & fuel cylinders upright, held with a chain while in use.
3. No specific distance is mentioned in statutes while in use. Other precautionary measures like leaks around the valve stem, leaks from the regulator, fuse plug, providing hoods over the cylinder to prevent the fall of hot spatters, etc., shall be ensured as better prevention.
Regards,
RAVINATH
From India, Mumbai
1. While storing, a 10-foot distance shall be maintained between fuel and oxygen cylinders.
2. NEVER KEEP FUEL & OXYGEN IN THE SAME VEHICLE FOR TRANSPORTATION. So, no question of safe distance arises. It is not safe to transfer fuel & oxygen cylinders in the same trolley. A trolley designed for two cylinders shall be used to keep both the oxygen & fuel cylinders upright, held with a chain while in use.
3. No specific distance is mentioned in statutes while in use. Other precautionary measures like leaks around the valve stem, leaks from the regulator, fuse plug, providing hoods over the cylinder to prevent the fall of hot spatters, etc., shall be ensured as better prevention.
Regards,
RAVINATH
From India, Mumbai
Dear Sir, Thanks for providing me with the NFPA 55 standard. Table 2-1.5 is basically for toxic gases. If I understood correctly, whereas in our case, both LPG and Oxygen are not toxic. However, this document also clearly mentions a distance of 6.1m.
Thanks for your input into the thread. I just want to know whether this 3-meter distance is safe during storage, whereas all the documents state that the safe distance to be maintained is 6.1m. Is this based on practicality only? Please have a look at the trolley in the attached file and give your suggestion. Is this transportation safe, especially when keeping both cylinders in the same trolley and using them on-site?
First of all, a warm welcome to the forum. I hope we will learn a lot from your side.
Now, my purpose is to raise an objection against the existing practices in our plant regarding the storage of cylinders. It's not in the main storage but in site-wise storage. The management is not convinced by my inputs, so I thought of studying more about it before giving further proposals. I request you to please go through the attachment and provide your valuable comments.
Please go through the attachment and add value to the thread, please.
Thanks for your inputs.
Thanks in advance to all.
Regards
From India
Thanks for your input into the thread. I just want to know whether this 3-meter distance is safe during storage, whereas all the documents state that the safe distance to be maintained is 6.1m. Is this based on practicality only? Please have a look at the trolley in the attached file and give your suggestion. Is this transportation safe, especially when keeping both cylinders in the same trolley and using them on-site?
First of all, a warm welcome to the forum. I hope we will learn a lot from your side.
Now, my purpose is to raise an objection against the existing practices in our plant regarding the storage of cylinders. It's not in the main storage but in site-wise storage. The management is not convinced by my inputs, so I thought of studying more about it before giving further proposals. I request you to please go through the attachment and provide your valuable comments.
Please go through the attachment and add value to the thread, please.
Thanks for your inputs.
Thanks in advance to all.
Regards
From India
Dear all, I had also captured a wrong practice of handling & transporting of chlorine cylinders. Kindly comment on its hazards & corrective actions of transporting them. Regards, Hansa Vyas
From India, Udaipur
From India, Udaipur
In my opinion, it's okay to transport the same in this bobcat. What's missing is that it's not secured properly. If this cylinder is kept in a vertical position and properly secured, I believe there will be no more issues. Let's wait for expert advice. Hope to receive replies soon.
Thank you.
From India
Thank you.
From India
Dear PTRC, Such incident happened in our plant too.IP was rolling O2 cylinder & it brust & his leg torn into pieces. Regards, Hansa Vyas
From India, Udaipur
From India, Udaipur
Dear friends, Interesting discussion.
Solve the Problem:
Oxygen cylinders in storage will be separated from fuel gas cylinders or combustible materials (especially oil and grease) by a minimum distance of 6 meters (20 feet) or by a noncombustible barrier at least 1.8 to 2 meters high, having a fire resistance rating of ½ hour. This is only for bulk storage, not for cylinders in service. Even at the site, if storage is necessitated, this separation is essential. You can make a combined cage, have a fire-resistant partition between O2 and fuel gases, and again separate full and empty cylinders. Having signboards (Fuel gas - empty - full, O2 Empty - full, etc.) ensures you are safe with your storage.
Regards,
Kesava Pillai
From India, Kollam
Solve the Problem:
Oxygen cylinders in storage will be separated from fuel gas cylinders or combustible materials (especially oil and grease) by a minimum distance of 6 meters (20 feet) or by a noncombustible barrier at least 1.8 to 2 meters high, having a fire resistance rating of ½ hour. This is only for bulk storage, not for cylinders in service. Even at the site, if storage is necessitated, this separation is essential. You can make a combined cage, have a fire-resistant partition between O2 and fuel gases, and again separate full and empty cylinders. Having signboards (Fuel gas - empty - full, O2 Empty - full, etc.) ensures you are safe with your storage.
Regards,
Kesava Pillai
From India, Kollam
Thank you for coming back and providing your valuable advice. You have resolved the issue regarding storage. Now, I request further guidance on transportation and usage. How much distance should be ensured during transportation and when in use? I have attached the photos in an earlier reply showing the practice we are following. Is that method correct and safe? Please guide.
Regards
From India
Regards
From India
Dear Hansa,
Thanks for the welcome. I was unable to visit the site due to personal reasons, so I missed out on many discussions. The current topic of discussion is quite interesting and will greatly assist us in developing and implementing safe practices for handling cylinders at the job site.
Could you please take some time to gather details, investigation reports, and any photos related to the incident you mentioned earlier? The improper practice of rolling cylinders and pushing them with legs seems to be prevalent in many industries. Sharing these details will enable me to motivate relevant individuals to adhere to safety protocols.
Dear PTRC, I kindly request you to share the necessary details. Your cooperation will be truly beneficial.
Thank you.
From India, Varanasi
Thanks for the welcome. I was unable to visit the site due to personal reasons, so I missed out on many discussions. The current topic of discussion is quite interesting and will greatly assist us in developing and implementing safe practices for handling cylinders at the job site.
Could you please take some time to gather details, investigation reports, and any photos related to the incident you mentioned earlier? The improper practice of rolling cylinders and pushing them with legs seems to be prevalent in many industries. Sharing these details will enable me to motivate relevant individuals to adhere to safety protocols.
Dear PTRC, I kindly request you to share the necessary details. Your cooperation will be truly beneficial.
Thank you.
From India, Varanasi
How much distance should be maintained while transporting and during use between oxygen and fuel gas (LPG or DA)? Can anyone provide a solution to this? If you can reference any act or rule, it would be very helpful to me.
Thanks in advance.
From India
Thanks in advance.
From India
Safety Distances in Gas Cylinder Storage
Safety distances are mentioned in the Gas Cylinder Rules 2004. These distances are based on the quantity being stored. Please refer to Form F, where distances are mentioned under the "Conditions" heading. You can find other details in the forms attached in the rules. The reference pages are 43 to 46 in the 2008 edition. The rules are the same for all toxic and flammable gases.
Regards
From India, Mumbai
Safety distances are mentioned in the Gas Cylinder Rules 2004. These distances are based on the quantity being stored. Please refer to Form F, where distances are mentioned under the "Conditions" heading. You can find other details in the forms attached in the rules. The reference pages are 43 to 46 in the 2008 edition. The rules are the same for all toxic and flammable gases.
Regards
From India, Mumbai
CiteHR is an AI-augmented HR knowledge and collaboration platform, enabling HR professionals to solve real-world challenges, validate decisions, and stay ahead through collective intelligence and machine-enhanced guidance. Join Our Platform.