Dear All Please find attached Safety Alert of one of the ACC plant for your information and taking necessary pro-active actions to prevent such incidents at your workplace.
From India
Acknowledge(0)
Amend(0)
730From India
Acknowledge(0)Amend(0)
Dear Dipil and Raghu, Would request to share some documents if you have on standard earthing procedures followed at construction sites. Regards, Firoz
From India, Bangalore
Acknowledge(0)Amend(0)
From India, Bangalore
Acknowledge(0)Amend(0)
Dear Firoz,
Please find the attached Earthing/Grounding-related documents. I hope they are helpful to you. (I do not have any specific documents for construction site earthing/grounding, but if I obtain any, I will share them.)
Dear Dipil,
If you have any construction grounding/earthing standard procedure documents, please share them. (I have been looking for these for a long time.)
I will wait for your instructions.
Thanks & Be safe,
Raghu
From United States, Fpo
Acknowledge(0)Amend(0)
Please find the attached Earthing/Grounding-related documents. I hope they are helpful to you. (I do not have any specific documents for construction site earthing/grounding, but if I obtain any, I will share them.)
Dear Dipil,
If you have any construction grounding/earthing standard procedure documents, please share them. (I have been looking for these for a long time.)
I will wait for your instructions.
Thanks & Be safe,
Raghu
From United States, Fpo
Acknowledge(0)Amend(0)
Dear Firoz,
I do not have anything specific on standard earthing procedures. However, I found the attached documents relevant to your query. I hope this will help you to find what you actually require. If you need anything specific, please let me know, and I will try to obtain it with the assistance of other seniors.
Dear Raghu,
Nice input from your side. I hope my attachment may also help you.
From India
Acknowledge(2)
Amend(0)
I do not have anything specific on standard earthing procedures. However, I found the attached documents relevant to your query. I hope this will help you to find what you actually require. If you need anything specific, please let me know, and I will try to obtain it with the assistance of other seniors.
Dear Raghu,
Nice input from your side. I hope my attachment may also help you.
From India
Acknowledge(2)Amend(0)
Dear Dipil,
Thank you for the attachments. Maybe the electrical safety book will be useful for me. The welding machine and the DG set will be moving from floor to floor in construction as per work requirements. If those are on the ground, we can use any of the earthing procedures suggested by you and Raghu. However, in this case, if the work is on the higher floors, the DG and welding machines will be carried on that particular floor where solid concrete will be present on the ground, and general earthing procedures will be difficult to provide. I am searching for an alternative.
Hope you both understood my problem.
Regards,
Firoz
From India, Bangalore
Acknowledge(0)Amend(0)
Thank you for the attachments. Maybe the electrical safety book will be useful for me. The welding machine and the DG set will be moving from floor to floor in construction as per work requirements. If those are on the ground, we can use any of the earthing procedures suggested by you and Raghu. However, in this case, if the work is on the higher floors, the DG and welding machines will be carried on that particular floor where solid concrete will be present on the ground, and general earthing procedures will be difficult to provide. I am searching for an alternative.
Hope you both understood my problem.
Regards,
Firoz
From India, Bangalore
Acknowledge(0)Amend(0)
Dear Firoz,
You can lay an earthing strip throughout the building, which is connected to an individual earth pit on the ground floor. Just provide a connection point from this particular earthing strip to each floor. You can simply connect the earth return cable of the welding machine or the body and neutral earthing of the DG to this particular strip.
I think this will be the best solution for your problem. Let me know your thoughts on this.
From India
Acknowledge(0)Amend(0)
You can lay an earthing strip throughout the building, which is connected to an individual earth pit on the ground floor. Just provide a connection point from this particular earthing strip to each floor. You can simply connect the earth return cable of the welding machine or the body and neutral earthing of the DG to this particular strip.
I think this will be the best solution for your problem. Let me know your thoughts on this.
From India
Acknowledge(0)Amend(0)
Very healthy discussions are going on about industrial safety. This type of alert should reach the HRs and be displayed at the workplaces to avoid accidents in the industry. Very good indeed. CITEHR is doing a really good service.
JR Kumar
From India, Hyderabad
Acknowledge(0)Amend(0)
JR Kumar
From India, Hyderabad
Acknowledge(0)Amend(0)
Dear Firoz and Raghu Just have a look into the attachment regarding earthing... May be useful to both of you...
From India
Acknowledge(0)Amend(0)
From India
Acknowledge(0)Amend(0)
Gathering data for an AI comment.... Sending emails to relevant members...
Looking for something specific? - Join & Be Part Of Our Community and get connected with the right people who can help. Our AI-powered platform provides real-time fact-checking, peer-reviewed insights, and a vast historical knowledge base to support your search.
Construction Site Safety.ppt
CiteHR.AI
(Fact Checked)-[response] The user's reply provides a practical solution for implementing earthing safety measures in the workplace to prevent incidents. It aligns with safety standards. (1 Acknowledge point)