Dear Kesava, Dipilji, Shaileshji, Hansaji, and other seniors,
What is the frequency of renewal of MSDS as per the Factory Act or any other chemical safety-related acts? Please guide.
Regards,
Abhay
From India, Mumbai
Acknowledge(0)
Amend(0)
52What is the frequency of renewal of MSDS as per the Factory Act or any other chemical safety-related acts? Please guide.
Regards,
Abhay
From India, Mumbai
Acknowledge(0)Amend(0)
Dear Abhay,
Please review the following from Factories Rules:
The occupier, while obtaining or developing a Material Safety Data Sheet in respect of a hazardous substance, shall ensure that the information recorded accurately reflects the scientific evidence used in making the hazard determination. If he becomes newly aware of any significant information regarding the hazards of a substance, or ways to protect against the hazards, this new information shall be added to the Material Safety Data Sheet as soon as practicable.
According to my understanding, no renewal frequency is fixed as per the Factories Act. You will need to verify whether any other acts have such provisions.
Regards,
Dipil Kumar V
From India
Acknowledge(0)Amend(0)
Please review the following from Factories Rules:
The occupier, while obtaining or developing a Material Safety Data Sheet in respect of a hazardous substance, shall ensure that the information recorded accurately reflects the scientific evidence used in making the hazard determination. If he becomes newly aware of any significant information regarding the hazards of a substance, or ways to protect against the hazards, this new information shall be added to the Material Safety Data Sheet as soon as practicable.
According to my understanding, no renewal frequency is fixed as per the Factories Act. You will need to verify whether any other acts have such provisions.
Regards,
Dipil Kumar V
From India
Acknowledge(0)Amend(0)
Dear sirs,
Kindly send the following Material Safety Data Sheet in Tamil:
- FEVICOL PLS 500
- FEVICOL PL 101
- FEVICOL SR 998FW
- FEVICOL SR 510
- FEVICOL HARDENER C
- PRIMER TPR 22 (L + P)
- CLEANER 301
- Fevicol 340
- Fevicol SR 451 (SR Adhesive)
- Glude Rod 301
- Thinner
- Diesel
It's urgent. Please send as early as possible.
Email: shan.rpt(at)gmail.com
Regards,
D. Shankar
From India, Madras
Acknowledge(1)Amend(0)
Kindly send the following Material Safety Data Sheet in Tamil:
- FEVICOL PLS 500
- FEVICOL PL 101
- FEVICOL SR 998FW
- FEVICOL SR 510
- FEVICOL HARDENER C
- PRIMER TPR 22 (L + P)
- CLEANER 301
- Fevicol 340
- Fevicol SR 451 (SR Adhesive)
- Glude Rod 301
- Thinner
- Diesel
It's urgent. Please send as early as possible.
Email: shan.rpt(at)gmail.com
Regards,
D. Shankar
From India, Madras
Acknowledge(1)Amend(0)
Dear Abhay,
As per OSHA 1910.1200 App E, in order to ensure that you have a current MSDS for each chemical in the plant as required, the rule does not require employers to maintain records of employee training, but many employers choose to do so. The list will eventually serve as an inventory of everything for which an MSDS must be maintained.
OSHA "Checklist for Compliance MSDS":
The following checklist will help ensure you are in compliance with the rule:
- Obtained a copy of the rule.
- Read and understood the requirements.
- Assigned responsibility for tasks.
- Prepared an inventory of chemicals.
- Ensured containers are labeled.
- Obtained MSDS for each chemical.
- Prepared a written program.
- Made MSDSs available to workers.
- Conducted training of workers.
- Established procedures to maintain the current program.
- Established procedures to evaluate effectiveness.
Mr. Dipil explains well; please check/refer to the factory act as well.
Hope this helps.
From United States, Fpo
Acknowledge(0)Amend(0)
As per OSHA 1910.1200 App E, in order to ensure that you have a current MSDS for each chemical in the plant as required, the rule does not require employers to maintain records of employee training, but many employers choose to do so. The list will eventually serve as an inventory of everything for which an MSDS must be maintained.
OSHA "Checklist for Compliance MSDS":
The following checklist will help ensure you are in compliance with the rule:
- Obtained a copy of the rule.
- Read and understood the requirements.
- Assigned responsibility for tasks.
- Prepared an inventory of chemicals.
- Ensured containers are labeled.
- Obtained MSDS for each chemical.
- Prepared a written program.
- Made MSDSs available to workers.
- Conducted training of workers.
- Established procedures to maintain the current program.
- Established procedures to evaluate effectiveness.
Mr. Dipil explains well; please check/refer to the factory act as well.
Hope this helps.
From United States, Fpo
Acknowledge(0)Amend(0)
Dear shankar, As per OSHA 1910.1200 App E . . . The MSDS must be in English. Hope information helps. . .
From United States, Fpo
Acknowledge(0)Amend(0)
From United States, Fpo
Acknowledge(0)Amend(0)
Dear Mr. Raghu,
I already have the MSDS for the following chemicals in English, but I need the MSDS in Tamil font for Social Auditing. That's why I am asking if it's possible to kindly send the MSDS below in Tamil. I tried using the Quillpad website, but it was not helpful for me.
- FEVICOL PLS 500
- FEVICOL PL 101
- FEVICOL SR 998FW
- FEVICOL SR 510
- FEVICOL HARDNER C
- PRIMER TPR 22 (L + P)
- CLEANER 301
- Fevicol 340
- Fevicol SR 451 (SR Adhesive)
- Glue Rod 301
- Thinner
- Diesel
Thank you for your information.
Regards,
D. Shankar
From India, Madras
Acknowledge(0)Amend(0)
I already have the MSDS for the following chemicals in English, but I need the MSDS in Tamil font for Social Auditing. That's why I am asking if it's possible to kindly send the MSDS below in Tamil. I tried using the Quillpad website, but it was not helpful for me.
- FEVICOL PLS 500
- FEVICOL PL 101
- FEVICOL SR 998FW
- FEVICOL SR 510
- FEVICOL HARDNER C
- PRIMER TPR 22 (L + P)
- CLEANER 301
- Fevicol 340
- Fevicol SR 451 (SR Adhesive)
- Glue Rod 301
- Thinner
- Diesel
Thank you for your information.
Regards,
D. Shankar
From India, Madras
Acknowledge(0)Amend(0)
Dear Abhay,
I will explain the procedure that we follow regarding MSDS for raw materials. We need to check with the vendor or request the vendor to send the material along with the MSDS, as many vendors do not provide it. It is essential to keep track of the MSDS to stay updated on any changes.
For finished goods, we review the MSDS whenever there is a change in additives or process chemicals. If equivalent chemicals are being used and the product specifications remain the same, the existing MSDS can still be used. However, if there are any changes or variations in the specifications, the MSDS needs to be renewed and revalidated.
As for legal matters, I am not well-versed. Let's wait for more information on that.
Thank you.
From India, Delhi
Acknowledge(0)Amend(0)
I will explain the procedure that we follow regarding MSDS for raw materials. We need to check with the vendor or request the vendor to send the material along with the MSDS, as many vendors do not provide it. It is essential to keep track of the MSDS to stay updated on any changes.
For finished goods, we review the MSDS whenever there is a change in additives or process chemicals. If equivalent chemicals are being used and the product specifications remain the same, the existing MSDS can still be used. However, if there are any changes or variations in the specifications, the MSDS needs to be renewed and revalidated.
As for legal matters, I am not well-versed. Let's wait for more information on that.
Thank you.
From India, Delhi
Acknowledge(0)Amend(0)CiteHR is an AI-augmented HR knowledge and collaboration platform, enabling HR professionals to solve real-world challenges, validate decisions, and stay ahead through collective intelligence and machine-enhanced guidance. Join Our Platform.
Chemical safety.ppt
E compliance.pdf