No Tags Found!

rohanputhran
8

Dear Professionals.. 1. What is the differ between MAN DAY LOST & WORK DAY LOST ? 2. What is Restricted work day case ? Please ans me soon.... with regards, RHP
From India, Karamsad
dipil
713

Dear RHP
Go through my views on your quiries:
1. What is the differ between MAN DAY LOST & WORK DAY LOST ?
According to my knowledge there is no difference... Both means the days lost due to accident...
2. What is Restricted work day case ?
Restricted Work Day Case (RWC) is a case in which a work-related injury or illness prevents the employee from working a complete shift (or from doing any tasks that are part of his or her regularly scheduled job that may be performed or assigned) but which does not result in lost workdays.
Hope your query get resolved... If not come up with your specific query...

From India
01990
1

Hi RHP,
1. I think both means same.
2. Restricted Work Day Case- is a work-related injury which results in the employee/contractor being unable to perform one or more of their routine functions for a full working day, from the day after the injury occurred.
Regards,
Nivi

From India, Mormugao
loginmiracle
362

Dear friends,

As far as I know these terms are used as follows -

1. Man days lost -

This term used mainly in industrial sector for the "stoppage of normal work" either due to -

i. Strikes, lockouts, lay off, hartal, bandhs, sit-in-dharna, gate meetings, accidents etc. - these are mostly collective action by the workers. This is to ascertain basically to sum up the loss of production or services, delays to refix the targets/dates etc. And in most incidents " no work no pay" formula. Govts. require data to give reports on loss due to these unforeseen/foreseen stoppages to the companies, govts. etc. Sometimes in prolonged stoppage like strikes there arises a dispute reg. continuity of service etc.

Calculation = 1000 workers stopped work on 26.12.11 in all the three shifts means 1000 x 3 x 3 = 9000 (9000 shifts) man days lost. Similarly part of the shifts also could be stated. While it is converted into money and related to cost, if it is paid, cost escalates > profit reduces. Supposing "No work No Pay" cost marginally escalates in the form of "fixed over heads" but targets slips.

2. Restricted workday case ?

This is also similar term but mostly used for other reasons - for e.g. There were local festivals which require closure of works few hours early of normal duty hours say for "half a day" or disperse two or 3 hours early. Or in house functions like Ayutha pooja. In some instances of eclipses works either open few hours late or closes few hours early. On these days the main difference is these days neither declared holiday nor a full working day but full wages are paid. Due to short of working hours definitely there will have to be shortage in full production in a shift. Sometimes on sudden riots for e.g. death of a popular leader in India violence break out instantaneously and estts. are forced to evacuate the workers immediately fearing danger to the lives of their workers (schools for e.g.). On such occasions there won't be salary cut.

With reg. to Accidents in work places, Man days are lost, the IR dept. collects such statistics on daily basis to report to the Inspector of Factories/Directorate of Mines in their periodical report under these various reasons. Factories are legally bound to furnish such information, failure to do so is punishable with fines as well.



Am I correct dear ?

kumar.s.

From India, Bangalore
lampard11
ooking at figure 3-13 at page 49 of ug612, the picture to the right.
From that picture it turns out that when clock uncertainty increases, the setup margin decreases.
But the thing is, increased clock uncertainty does not decrease the setup time, because the setup time is amount of time before clock rising edge for which signal at D input must be valid, no matter when that rising edge occured?
But it makes sense to say that if clock uncertainty increased, them my slack is decreased, or i just have less time in my reserve; however, the setup time period is just same.
So to what do they refer to when they say "setup margin", is it exactly what i described above or not?
Just wanted to make this clear for myself, thank you.

From India, Delhi
Community Support and Knowledge-base on business, career and organisational prospects and issues - Register and Log In to CiteHR and post your query, download formats and be part of a fostered community of professionals.





Contact Us Privacy Policy Disclaimer Terms Of Service

All rights reserved @ 2024 CiteHR ®

All Copyright And Trademarks in Posts Held By Respective Owners.