No Tags Found!


There is always confusion about whether electrical conversion has to be included in the list of machinery when applying for a factory license. Therefore, I need clarification on machinery list submission as per the Factories Act.
From India, Chennai
Acknowledge(0)
Amend(0)

Glidor
651

HP calculation is done by factory manager by calculating the total power used by machinery, otherwise look at electric bill you will find it 800 Watt= 1 HP 1000 Watt = I KW

Acknowledge(0)
Amend(0)

Machinery List for Factory License

You need to provide the complete list of machinery installed or under installation in a factory. Every manual of the machinery provides complete technical details, including the horsepower of the machine. There is no common list of machinery applicable to all factories, plants, or units. As you know, the machinery to be used depends on the nature of the product, size, capacity, process, extent of automation, handling requirements, logistics support, etc. Therefore, ask your plant head to fill out these forms and annexures as may be required. This should include electrical, waste/effluent treatment, disposal, safety equipment, etc.

Electrical Conversion in the Process

Can you also elaborate on what sort of 'electrical conversion' is taking place in your process at the plant?

From India, Bangalore
Acknowledge(0)
Amend(0)

CiteHR is an AI-augmented HR knowledge and collaboration platform, enabling HR professionals to solve real-world challenges, validate decisions, and stay ahead through collective intelligence and machine-enhanced guidance. Join Our Platform.







Contact Us Privacy Policy Disclaimer Terms Of Service

All rights reserved @ 2025 CiteHR ®

All Copyright And Trademarks in Posts Held By Respective Owners.