No Tags Found!


vikashr82
6

Weekly Holidays states that no adult worker shall be required or allowed to work in a factory on the first day of the week (Sunday).Unless he has or will have a holiday for a whole day on one of the three days immediately before or after the said day...provided that no substitution shall be made which will result in any worker working for " more than ten days consecutively without a holiday for a whole day".Now suppose considering first Sunday as off he works on M(1),T(2),Wed(3),Thu(4),Fri(5),Sat(6),Sunday(7),M( 8),Tue(9),HOLIDAY(10)(substituted holiday).
The last substituted holiday constitute of a total 10 days then why its being said in the proviso stated above as no substitution which will result for more than ten days working as it is already defined that a weekly holiday and three days before or three days after the said day for substitution.How can a substitution be made more than 10 days which will result in more than 10 days working.Kindly illustrate with an example

Regards
Vikas

From India, Calcutta
malikjs
167

Dear Vikas there is no substitution allowed beyond 10 days.in emergent situation you can defer or pre pond weekly off by three days by giving intimation to labour dept.
From India, Delhi
umakanthan53
6018

Dear Vikas,

If my understanding of Sec.52 of the Factories Act,1948 is wholistic and hence correct, I wish to point out that your interpretation of the section gets either diffused or distracted because of the word " substitution " employed in the rider clause to the section. Let's analyse the section in the seriatim of its sub-sections with your own illustration so that we can reach a clear-cut understanding of the section in its entirety.

(1) Normally, no adult worker shall be allowed or asked to work on the first day of the week i.e.,Sunday or "the said day". [ sec.52(1) ]

(2) However, he can be allowed or asked to work on "the said day" i.e., Sunday provided that EITHER he was given a holiday of a wholeday in the immediately preceeding Saturday(3) or Friday(2) or Thursday(!) OR he wil be given a day's holiday in the succeeding Monday(1) or Tuesday(2) or Wednesday(3). [clause a of ss (1) of sec.52]

(3) The above requirement is subject to the delivery of a notice containing the particulars of "the said day" and the day of the substituted holiday in lieu thereof to the Factories Inspector AND display of the same in the factory. [ sub-clauses (i) and (ii) of Clause (b) of sec.52(1) ]

(4) Again, the proviso to Sec.52(1) imposes a restriction that the substitution shall not result in more than 10 consecutive working days without a holiday. The stretch of consecutive working days commences from the next day after the last weekly holiday allowed to the worker and ends up with the day just before the substituted holiday inclusive of "the said day" for which substitution is made.

Now, coming to your illustration, M(1) to T(9) is the stretch of consecutive working days inclusive of "the said day" ( S7) for which holiday is allowed on the 10th day. M1 to T9 comprises of only 9 consecutive working days. It is true that prior to S7, he works on all the six days continuously without a holiday; but it is actually true that on the succeeding Wednesday ( the 10th day after the stretch of consecutive working days and the 3rd day after S7) he gets a holiday.

From India, Salem
vikashr82
6

Respected Umakanthan Sir,

As quoted by you "The stretch of consecutive working days commences from the next day after the last weekly holiday allowed to the worker and ends up with the day just before the substituted holiday inclusive of "the said day" for which substitution is made".

a)If substituted holiday is before the said day-TH,FRI,SAT (SUN-SAID DAY)

b)If substituted holiday is after the said day-(SUN-SAID DAY)MON,TUE,WED

Now in case a) he takes a substituted day suppose on Thursday and works on Sunday then he will be having leave again on Thursday(counting from Friday)(correct me if i am wrong)and same is the case with (B) where he takes leave on any three days after the said day

So if section 52 restricts[clause a of ss (1) of sec.52] by saying that three days before and three days after the said day substitution can be taken then how come the proviso says that @no working for more than 10 already a restriction has been imposed where 10 more than ten days working is not possible.

may query may be a bit out of the way but i am confused on more than 10 days working proviso as to the existence of it when more than ten days working is not possible(as per section).

Regards

Vikas

From India, Calcutta
umakanthan53
6018

Dear Vikas,
Factories Act is an establishment-related enactment with the primary objective of regulating employment therein. Certain manufacturing activities are of such a continuous nature that the factory has to be run on 24 x 7 basis. In such cases, engagement of labour has to be on shift basis which again has to be on rotation of the entire labour among the shifts. Therefore, weekly-off can not be granted regularly on a particular day of the week and as a sequel to this practical bottle-neck, the adherence of the principle of "6 days continuous work followed by the 7th day of rest" will not be also possible at times. So, a restriction has to be in place in order to regulate the relaxations one way or the other.

From India, Salem
vikashr82
6

Respected Sir,
Thanks a lot sir for clearing my doubts regarding weekly holiday proviso.Now I understood as continuous process & shifts affects the implementation of 6 days working and as such the proviso comes in light.
Sir, would you please throw some light on shift working.How shift working process takes places.Some places there are three shifts some places four..then there is a general shift.Each period defined is called a shift and sets of workers are defined as relay.
But i dont know the process as to how it is all done.
Regards
Vikas

From India, Calcutta
V.Raghunathan
1330

Dear Vikas,
Continuous Process Industries have a spot for every location that needs monitoring. Every spot is manned 24 hours 7 days a week. Suppose there are ten spots that are to be covered in a plant in every shift. The manpower planning is done as three and half person per spot. Since there cannot be half a person, it is fixed as 4 persons per spot. The fourth person is referred as reliever.
The people who attend round the clock shift are divided into groups say A,B C,D,E,F and G. The people in A group will have weekly off on say Monday, B group will have off on Tuesday, C group will have off on Wednesday and so on. From A to G all groups will have 5 persons each. Groups are combined in a pattern A and D, B and E, C and F...so on. The running shift people therefore get a weekly off after every six days. For three days a week the reliever may come in the general shift.
A shift schedule is drawn and it follows a cyclic pattern.
V.Raghunathan

From India
vikashr82
6

Respected Raghunathan Sir,
Thanking you for providing information regarding shifts.Sir,with due respected can you provide more information on your statement "The manpower planning is done as three and half person per spot. Since there cannot be half a person, it is fixed as 4 persons per spot".Is there any calculation of total number of persons on any day involved to get three and half person spot.
Secondly group combination is done in a pattern so that they get weekly off(correct me if i am wrong sir)
Sir, IS the general shift is of administrative staff or its related to workers shift?
IS every shift is divided into a time slot of 8 hours?
Do these 8 Hours include lunch break...what about those who are coming during the night and have eaten their dinner at home.Is still any break is given after working of five hours?
Sir,i would be highly grateful to you if you provide more details regarding shifts in manufacturing process.?
Regards
Vikas

From India, Calcutta
radhakrishnahr
2

Let's say a company fixes weekly off as Sunday for shift A group. A worker will work on Sunday and gets off on next Wednesday. He should get weekly off again on coming Sunday unless it is adjusted again.
According the clarifications made above, consecutive days should not be more than 10.
According to my interpretation, in anyway 10th day will be the off day. There need not be any specific restriction regarding that, if I am correct.
Anyhow, how unethical employers would have exploited their workers if the 10 days restriction had not been there?
Respected Seniors kindly clarify my confusion.

From India, Kolkata
V.Raghunathan
1330

Mr Vikas,
I have attached a shift schedule with two spread sheets one below the other in a word doc.
One shows detailing for one spot and the other shows detailing for two spots.
After going through this attached file, I hope you will get some clarity.
@Mr Radhakrishnan
There is a practice by which that you can give a weekly off after FOURTH day and before TENTH day.
You need not always wait for six days. This is to adjust the shift schedule.
This range of four to ten days gives flexibility between one OFF and another OFF.
It is done once in a while and not every week.
V.Raghunathan

From India
Attached Files (Download Requires Membership)
File Type: docx Shift Roster Sample.docx (78.2 KB, 786 views)

Community Support and Knowledge-base on business, career and organisational prospects and issues - Register and Log In to CiteHR and post your query, download formats and be part of a fostered community of professionals.






Contact Us Privacy Policy Disclaimer Terms Of Service

All rights reserved @ 2024 CiteHR ®

All Copyright And Trademarks in Posts Held By Respective Owners.