Understanding Maximum Credible Loss Scenario Study
What is meant by the maximum credible loss scenario study? Why is it to be conducted? Who can conduct this? Is there any standard/guideline to conduct this internally by a safety person with the HAZOP team?
Regards,
Abhay
From India, Mumbai
Acknowledge(0)
Amend(0)
52What is meant by the maximum credible loss scenario study? Why is it to be conducted? Who can conduct this? Is there any standard/guideline to conduct this internally by a safety person with the HAZOP team?
Regards,
Abhay
From India, Mumbai
Acknowledge(0)Amend(0)
Understanding Maximum Credible Loss Scenario Study
What is meant by the maximum credible loss scenario study?
The studies are carried out by assessing the existing conditions of the workplace, process, operation, plant, and equipment. Based on the observations made and results obtained, industries are advised to minimize or eliminate hazards in the form of a study report. The total duration for carrying out the study and submitting the report depends on the size of the plant, number of locations, number of samples collected, type of analytical method adopted, etc. As such, the study may be completed, and the report prepared within 4 months.
This includes the determination of the affected distance for the identified maximum credible loss scenarios using computer-aided software. This distance would indicate the radiation and overpressure levels for flammable substances and vapor concentration for toxic chemicals. By using this technique, one can relocate areas of the site that would be affected in the event of an emergency. Consequence analysis distances are incorporated into the on-site as well as off-site emergency management system.
Dear all, wait for commands...
Thanks in advance.
Regards,
Raghu
From United States, Fpo
Acknowledge(0)Amend(0)
What is meant by the maximum credible loss scenario study?
The studies are carried out by assessing the existing conditions of the workplace, process, operation, plant, and equipment. Based on the observations made and results obtained, industries are advised to minimize or eliminate hazards in the form of a study report. The total duration for carrying out the study and submitting the report depends on the size of the plant, number of locations, number of samples collected, type of analytical method adopted, etc. As such, the study may be completed, and the report prepared within 4 months.
This includes the determination of the affected distance for the identified maximum credible loss scenarios using computer-aided software. This distance would indicate the radiation and overpressure levels for flammable substances and vapor concentration for toxic chemicals. By using this technique, one can relocate areas of the site that would be affected in the event of an emergency. Consequence analysis distances are incorporated into the on-site as well as off-site emergency management system.
Dear all, wait for commands...
Thanks in advance.
Regards,
Raghu
From United States, Fpo
Acknowledge(0)Amend(0)
Dear all/seniors, Please come forward and help to get soluction on our member/Mr.abhay query.More than 50 viewers but no reply"s. . . Hope your reply earliest. . . Thanks in advance. . .
From United States, Fpo
Acknowledge(0)Amend(0)
From United States, Fpo
Acknowledge(0)Amend(0)
Dear Abhay,
Maximum Credible Loss Accident Analysis
Maximum credible (loss) accident analysis is one of the most widely used concepts in risk assessment of chemical process industries, which involves the following steps:
1. **Development of Credible Accident Scenarios:** For the units of any industry being analyzed, a set of scenarios are developed for accidents which are 'credible'; the credibility is qualitatively understood as a combination of likelihood (of occurrence) and scale (of damage potential).
2. **Delineation of Maximum Credible Accident Scenario:** Based on the credibility of the accident scenarios, they are ranked, and maximum credible accident scenarios are identified.
3. **Damage Calculations through Mathematical Modelling:** The impact of these scenarios—for example, an explosion followed by a fireball—is then studied using available models of explosion, boiling liquid expanding vapor cloud explosion (BLEVE), confined vapor cloud explosion (CVCE), vapor cloud explosion (VCE), and fireball.
4. **Risk Estimation:** Based on the damage potential estimated in the previous step and the probability of occurrence of these credible accident scenarios, risk factors are estimated.
Central to these steps is the aspect of 'credibility'. A 'credible' accident is one which is within the realm of possibility and is also likely to be severe enough to cause significant damage.
Hope this answers you. Once again, I'm late due to a tight schedule. Kindly regret, as it cannot be avoided in my current schedule. But I'm happy to see many good questions arising from you. Keep on asking (with patience to get a reply).
Dear Ragu,
Once again, thank you for your valuable contribution. Keep on contributing. Even though I'm not answering all the posts, I'm having a look at the posts at least during alternate days. But due to the current tight work schedule, I'm unable to reply or take part immediately.
Regards
From India, Delhi
Acknowledge(0)Amend(0)
Maximum Credible Loss Accident Analysis
Maximum credible (loss) accident analysis is one of the most widely used concepts in risk assessment of chemical process industries, which involves the following steps:
1. **Development of Credible Accident Scenarios:** For the units of any industry being analyzed, a set of scenarios are developed for accidents which are 'credible'; the credibility is qualitatively understood as a combination of likelihood (of occurrence) and scale (of damage potential).
2. **Delineation of Maximum Credible Accident Scenario:** Based on the credibility of the accident scenarios, they are ranked, and maximum credible accident scenarios are identified.
3. **Damage Calculations through Mathematical Modelling:** The impact of these scenarios—for example, an explosion followed by a fireball—is then studied using available models of explosion, boiling liquid expanding vapor cloud explosion (BLEVE), confined vapor cloud explosion (CVCE), vapor cloud explosion (VCE), and fireball.
4. **Risk Estimation:** Based on the damage potential estimated in the previous step and the probability of occurrence of these credible accident scenarios, risk factors are estimated.
Central to these steps is the aspect of 'credibility'. A 'credible' accident is one which is within the realm of possibility and is also likely to be severe enough to cause significant damage.
Hope this answers you. Once again, I'm late due to a tight schedule. Kindly regret, as it cannot be avoided in my current schedule. But I'm happy to see many good questions arising from you. Keep on asking (with patience to get a reply).
Dear Ragu,
Once again, thank you for your valuable contribution. Keep on contributing. Even though I'm not answering all the posts, I'm having a look at the posts at least during alternate days. But due to the current tight work schedule, I'm unable to reply or take part immediately.
Regards
From India, Delhi
Acknowledge(0)Amend(0)
Dear KVS, I wanted to thank you for your input that you have provided, especially on this thread (Mr. Abhay's query). Thank you very much, sir. Keep in touch.
Dear all/Seniors, I hope to receive your inputs/commands on this thread at the earliest. Thanks in advance.
Dear Abhay, Please let me know if Mr. KVS's answers fulfill your query?
@ KVS Ji, Thanks for the explanation. The first three questions are mostly covered. Kindly suggest if there is any standard/guideline to conduct this internally. Any small example if possible.
Regards,
Abhay
@ Raghuji, hats off to your helping nature. Thanks.
Other chemical experts, kindly look at the thread and provide assistance.
From India, Mumbai
Acknowledge(0)Amend(0)
Dear all/Seniors, I hope to receive your inputs/commands on this thread at the earliest. Thanks in advance.
Dear Abhay, Please let me know if Mr. KVS's answers fulfill your query?
@ KVS Ji, Thanks for the explanation. The first three questions are mostly covered. Kindly suggest if there is any standard/guideline to conduct this internally. Any small example if possible.
Regards,
Abhay
@ Raghuji, hats off to your helping nature. Thanks.
Other chemical experts, kindly look at the thread and provide assistance.
From India, Mumbai
Acknowledge(0)Amend(0)
Dear Penney, thanks for your consideration and response.
Dear Abhay, please let me know!
Conducting an MCLS Study
Dear All, thank you for the response. We have storage tanks containing Toluene, Methanol, TBA, Hexane, and caustic lye. We want to conduct a Maximum Credible Loss Scenario (MCLS) study for these. Kindly suggest a standard operating procedure to be followed by our internal team. If you have a sample or guideline, please post it.
Regards,
Abhay
From India, Mumbai
Acknowledge(0)Amend(0)
Dear Abhay, please let me know!
Conducting an MCLS Study
Dear All, thank you for the response. We have storage tanks containing Toluene, Methanol, TBA, Hexane, and caustic lye. We want to conduct a Maximum Credible Loss Scenario (MCLS) study for these. Kindly suggest a standard operating procedure to be followed by our internal team. If you have a sample or guideline, please post it.
Regards,
Abhay
From India, Mumbai
Acknowledge(0)Amend(0)CiteHR is an AI-augmented HR knowledge and collaboration platform, enabling HR professionals to solve real-world challenges, validate decisions, and stay ahead through collective intelligence and machine-enhanced guidance. Join Our Platform.
Process safety Risk assessment Training.pdf
Chemical safety.ppt