Kinldy give the information what type of lincense require for the storage for gas cyalinder in the factory premises. Regards Amish shah
From India, Vadodara
Acknowledge(0)
Amend(0)
1From India, Vadodara
Acknowledge(0)Amend(0)
Dear Amish Which type of gas cylinder and how much quantity you want to store? Come with specific requirement so that any of our forum member can help you... Regards, Dipil Kumar V
From India
Acknowledge(0)Amend(0)
From India
Acknowledge(0)Amend(0)
Dear Amish,
Please go through the below information:
GAS CYLINDERS RULES, 2004, CHAPTER VI - FILLING AND POSSESSION
Rule 44. No license needed for filling and possession in certain cases: — Notwithstanding anything contained in Rule 43, no license shall be necessary for:
(a) possession of any cylinder filled with a compressed gas by a carrier or another person for the purpose of transport in accordance with the provisions of these rules;
(b) possession of cylinders filled with -
(i) liquefied petroleum gas when the total quantity of gas does not exceed 100 kg at a time;
(ii) any other flammable but non-toxic gas when the total number of cylinders containing such gas does not exceed 25 or the total weight of gas does not exceed 200 kg, whichever is less, at a time;
(iii) any non-flammable non-toxic gas when the total number of such cylinders does not exceed 200 at a time;
(iv) any toxic gas when the total quantity of such cylinders does not exceed 5 at a time;
(v) acetylene gas contained in cylinders in a dissolved state when the total quantity of such cylinder does not exceed 50 at a time.
I hope this information may be useful to you.
Thanks and Regards,
Srinivasarao. M
From India, Calcutta
Acknowledge(0)Amend(0)
Please go through the below information:
GAS CYLINDERS RULES, 2004, CHAPTER VI - FILLING AND POSSESSION
Rule 44. No license needed for filling and possession in certain cases: — Notwithstanding anything contained in Rule 43, no license shall be necessary for:
(a) possession of any cylinder filled with a compressed gas by a carrier or another person for the purpose of transport in accordance with the provisions of these rules;
(b) possession of cylinders filled with -
(i) liquefied petroleum gas when the total quantity of gas does not exceed 100 kg at a time;
(ii) any other flammable but non-toxic gas when the total number of cylinders containing such gas does not exceed 25 or the total weight of gas does not exceed 200 kg, whichever is less, at a time;
(iii) any non-flammable non-toxic gas when the total number of such cylinders does not exceed 200 at a time;
(iv) any toxic gas when the total quantity of such cylinders does not exceed 5 at a time;
(v) acetylene gas contained in cylinders in a dissolved state when the total quantity of such cylinder does not exceed 50 at a time.
I hope this information may be useful to you.
Thanks and Regards,
Srinivasarao. M
From India, Calcutta
Acknowledge(0)Amend(0)
Dear Friends, kindly give the safety precautions for hydrogenation reactor. Regards, D.Nagaraju
From Germany, Frankfurt Am Main
Acknowledge(0)Amend(0)
From Germany, Frankfurt Am Main
Acknowledge(0)Amend(0)
Dear Mr. Amish,
You need to construct a godown as per the guidelines of the Gas Cylinder Rules 2004 if you intend to store gas more than 100 kg on any premises.
1. You need to apply for the godown to PESO (Petroleum & Explosives Safety Organisation).
2. Construct the godown after receiving approval.
3. Apply for a license to store the gas in the constructed godown.
4. If the drawing and godown meet the requirements of PESO, PESO will grant the license and endorse the same after a site visit.
5. Once you receive the license, you can store the gas within the licensed capacity only.
Regards,
Sunil Gajadharane
9850894964
From India, Pune
Acknowledge(0)Amend(0)
You need to construct a godown as per the guidelines of the Gas Cylinder Rules 2004 if you intend to store gas more than 100 kg on any premises.
1. You need to apply for the godown to PESO (Petroleum & Explosives Safety Organisation).
2. Construct the godown after receiving approval.
3. Apply for a license to store the gas in the constructed godown.
4. If the drawing and godown meet the requirements of PESO, PESO will grant the license and endorse the same after a site visit.
5. Once you receive the license, you can store the gas within the licensed capacity only.
Regards,
Sunil Gajadharane
9850894964
From India, Pune
Acknowledge(0)Amend(0)
Hello everyone,
Can anyone kindly help me with information about the complete procedure? I have been recently allotted a gas agency with 12,000 kg of LPG-filled cylinders. I request everyone to provide information about the procedure on how to apply to PESO for a godown license and approval.
Thanks,
Dhanraj G
From India, Thane
Acknowledge(0)Amend(0)
Can anyone kindly help me with information about the complete procedure? I have been recently allotted a gas agency with 12,000 kg of LPG-filled cylinders. I request everyone to provide information about the procedure on how to apply to PESO for a godown license and approval.
Thanks,
Dhanraj G
From India, Thane
Acknowledge(0)Amend(0)CiteHR is an AI-augmented HR knowledge and collaboration platform, enabling HR professionals to solve real-world challenges, validate decisions, and stay ahead through collective intelligence and machine-enhanced guidance. Join Our Platform.
The Gas Cylinder Rules 2016.pdf
Have U ever heard about LPG gas cylinder.doc
Compressed Gas Cylinders Handling and Storage.zip