No Tags Found!


suresh4ehs
Dear sir, Please send definition what is hazard, risk, accident, unsafe act, unsafecondtion. ans any other technical words with definition. Safety Regards, suresh
From India, Hyderabad
canavman
2

Dear Suresh

You are speaking my language. Please see suggested definitions as follows:

A HAZARD is any situatuation, condition, thing or action (inaction if appropriate) which has the potential to cause harm. This harm includes injury to personnel and/ or damage to property. This includes third party personnel and private/ public property. All hazards in the workplace must be identified in order to be managed. It is a sad truth that not all hazards can be eliminated. it is important that all employees must (if possible a a condition of employment) report all hazards to magagement.

Once hazards have been identified, they must be considered in terms of PROBABILITY (what is the chance of the potential harm becoming a reality) and SEVERITY (how bad could it be if the potential harm became a reality). Only once this has been fully considered, can this hazard be considered in terms of RISK. This could become a very complex issue. To start keep it simple. Consider both the aspects of the RISK (PROBABILITY and SEVERITY) as LOW, MEDIUM or HIGH). This will enable you to have a realistic understanding of the hazard and will give som indication of how to prioritize and manage the risk. Some sort of mitigation meaures must be appied to the risk in order to decrease the possible consequences to a minimum.

An ACCIDENT is the exchange of energy which takes place when the elements of a RISK come together, causing injury or damage. If there has been no damage or injury, the event is by definition not an accident, but an INCIDENT.

An UNSAFE ACT is an act or ommission by any person in the workplace which has the potential to cause harm (injury/ damage). Unsafe act are usually not deliberate. UNSAFE CONDITIONS are as defined above as HAZARDS.

I hope this helps. Best regards, Craig

From United Arab Emirates, Sharjah
bijay_majumdar
365

Hi Suresh,
Craig Has defined in nut shell the complete safety aspect.
I Appriciate that Mr. Craig.
Murphy Law in terms of safety says that if 'Everything that can possibly go wrong will go wrong'." It means Hazards as said by craig is present everywhere and can not be eliminated completelty, therefore IF hazards exist then accidents and accidents can not be avoided, thus Murphys laws is true.
Hazards leads to risks and risk poses potentiality of accidents and incidents.When we analyse and identify harzards, risk is minimised and thus the rate and severity of accidents and incidents get minimised.One importatnt factor that plays great role in minimising the accidents and incidents is the awareness and training.Human error, their behavoiur, mentality and attitude towards understanding the safety and its consequences also play vital role in prevention of accidents and incidents through adherence of safety norms and undestanding the hazard and risk factors.
Thanks
Bijay

From India, Vadodara
Community Support and Knowledge-base on business, career and organisational prospects and issues - Register and Log In to CiteHR and post your query, download formats and be part of a fostered community of professionals.





Contact Us Privacy Policy Disclaimer Terms Of Service

All rights reserved @ 2024 CiteHR ®

All Copyright And Trademarks in Posts Held By Respective Owners.