Dear all, Please find the centrifuge safety presentation and useful information. And give your valuable inputs. Regards/prasad
From India, Bangalore
Acknowledge(0)
Amend(0)
15From India, Bangalore
Acknowledge(0)Amend(0)
Dear Mr Prasad ,
It is good that you have posted a safety presentation on Centrifuge
for the benefit of viewers.
1.0 As you are aware there are different types of centrifuges
top driven , bottom driven, belt driven , direct driven etc
You could have mentioned the one you have referred.
2.0 Centrifuges are found in many locations say a clinical
laboratory, a research lab, small scale industry, big industry etc
You could have specified for what application the referred
centrifuge is used.
3.0 Centrifuging operations can be conducted for a simple
separation of slurry or special applications like what you
have mentioned Using Nitrogen. Since an inert atmosphere
is specified in your presentation you could have also
mentioned why you need an
inert atmosphere. This will provide process safety awareness
to the viewer.
4.0 In the third and fourth slide, the last line is the same. Is it correct?
5.0 What is purpose of a wrist band safety aspect ?
Pl explain for the benefit of viewers.
6.0 All the slides seem to have been made in a hurry.
Requires editing.
7.0 Oxygen level monitoring is not required for all types of Centrifuging.
Please mention the specific safety
aspect for the application you have mentioned.
8.0 It is mentioned that vent is connected to a catch pit.
Is the catch pit under vacuum?
9.0 Please mention the reason for providing a flame arrester
in the catch pit. What is the safety reason for the same?
That is mention the explosive gas Or combustible material
in your case.
10.0 The DOs are more than DONTs. Please see if it is
necessary to add more of DONTs.
11.0 A simple sketch showing what is to be centrifuged, the drive
arrangement, the outputs, catch pit, flame arrester, Nitrogen
source,basic Instrumentation etc would help the viewers
understand your system and safety aspects better.
Thanks for the initiative taken to share the posting.
V.Raghunathan . Navi Mumbai
From India
Acknowledge(0)Amend(0)
It is good that you have posted a safety presentation on Centrifuge
for the benefit of viewers.
1.0 As you are aware there are different types of centrifuges
top driven , bottom driven, belt driven , direct driven etc
You could have mentioned the one you have referred.
2.0 Centrifuges are found in many locations say a clinical
laboratory, a research lab, small scale industry, big industry etc
You could have specified for what application the referred
centrifuge is used.
3.0 Centrifuging operations can be conducted for a simple
separation of slurry or special applications like what you
have mentioned Using Nitrogen. Since an inert atmosphere
is specified in your presentation you could have also
mentioned why you need an
inert atmosphere. This will provide process safety awareness
to the viewer.
4.0 In the third and fourth slide, the last line is the same. Is it correct?
5.0 What is purpose of a wrist band safety aspect ?
Pl explain for the benefit of viewers.
6.0 All the slides seem to have been made in a hurry.
Requires editing.
7.0 Oxygen level monitoring is not required for all types of Centrifuging.
Please mention the specific safety
aspect for the application you have mentioned.
8.0 It is mentioned that vent is connected to a catch pit.
Is the catch pit under vacuum?
9.0 Please mention the reason for providing a flame arrester
in the catch pit. What is the safety reason for the same?
That is mention the explosive gas Or combustible material
in your case.
10.0 The DOs are more than DONTs. Please see if it is
necessary to add more of DONTs.
11.0 A simple sketch showing what is to be centrifuged, the drive
arrangement, the outputs, catch pit, flame arrester, Nitrogen
source,basic Instrumentation etc would help the viewers
understand your system and safety aspects better.
Thanks for the initiative taken to share the posting.
V.Raghunathan . Navi Mumbai
From India
Acknowledge(0)Amend(0)
Dear sir,
A wristband is used for the ESD (electrostatic discharge) of those who are working in the centrifuge room. This is a preventive measure for preventing the generation of static electricity in the human body during activities. Most bulk production plants use centrifuges for material drying. In such conditions, it is essential to maintain an inert atmosphere as a safe mode of operation.
Regards,
Prasad
From India, Bangalore
Acknowledge(0)Amend(0)
A wristband is used for the ESD (electrostatic discharge) of those who are working in the centrifuge room. This is a preventive measure for preventing the generation of static electricity in the human body during activities. Most bulk production plants use centrifuges for material drying. In such conditions, it is essential to maintain an inert atmosphere as a safe mode of operation.
Regards,
Prasad
From India, Bangalore
Acknowledge(0)Amend(0)
Dear Mr. S. Prasad,
Thank you for your feedback. I am a Chemical Engineer with experience in the areas of Manufacturing and Projects, besides many others related to Heavy Industries. My questions addressed to Mr. GDV Prasad were with a view of knowing more about safety-related issues pertaining to Centrifuge operations.
V. Raghunathan
Navi Mumbai
From India
Acknowledge(0)Amend(0)
Thank you for your feedback. I am a Chemical Engineer with experience in the areas of Manufacturing and Projects, besides many others related to Heavy Industries. My questions addressed to Mr. GDV Prasad were with a view of knowing more about safety-related issues pertaining to Centrifuge operations.
V. Raghunathan
Navi Mumbai
From India
Acknowledge(0)Amend(0)Gathering data for an AI comment.... Sending emails to relevant members...
Join Our Community and get connected with the right people who can help. Our AI-powered platform provides real-time fact-checking, peer-reviewed insights, and a vast historical knowledge base to support your search.
Fire & safety training presentation.pp t