No Tags Found!


Dheeraj Chaubey
3

Total Productive Maintenance (TPM) is a system of maintaining and improving the integrity of production, safety and quality systems through the machines, equipment, processes, and employees that add business value to an organization.

One of the major goals of TPM and OEE programs is to reduce and/or eliminate what are called the Eight Big Losses – the most common causes of equipment-based productivity loss in manufacturing. ... Capture the Eight Big Losses to gain additional actionable insight to the OEE Factors of Availability, Performance, and Quality.

OEE (Overall Equipment effectiveness) is the main performance measure that drives action within Total Productive Maintenance (TPM) and is used by the teams to focus their continuous improvement activities as well as identifying those areas that require resource. The preferred OEE calculation is based on the three OEE Factors: Availability, Performance, and Quality. OEE is calculated by multiplying the three OEE factors: Availability, Performance, and Quality.

Plant managers, line supervisors, and machine operators work with the equipment day in and day out, and they know what's normal and what's not. A TPM approach gives operators the primary responsibility for taking care of their equipment, including cleaning, inspection, and basic maintenance.

These basic seven pillars of TPM:

• Autonomous maintenance.

• Kobetsu Kaizen (Focused Improvement)

• Planned Maintenance.

• Quality maintenance.

• Training and Education.

• Office TPM.

• Safety Health Environment (SHE)

Overall plant efficiency is the product of availability, performance rate, and quality products rate and expresses the overall condition of a plant with regard to time, performance and quality. Overall plant efficiency is used as an index of the degree to which a plant is used to produce added value.

01. Shutdown losses:

• Definition: Time lost during production stops due to planned annual shutdown maintenance or periodic maintenance.

• Example: Shutdown maintenance, periodic maintenance, statutory inspection, autonomous inspection, general repair work etc.

02. Production adjustment losses:

• Definition: Time lost during production adjustments made necessary by supply- demand fluctuations.

• Example: Production-adjustment- related production stops, inventory-adjustments-related production stops etc.

03. Equipment failure losses:

• Definition: Time lost during sudden production stops occurring when equipment loses its specified functions.

• Example: Broken pump burnt motor, damaged bearings, broken shaft.

04. Process failure losses:

• Definition: Time lost during plant shutdown caused by changes in chemical or physical characteristics of materials handled, operation errors, disturbances etc.

• Example: Leaks, spills, blocks, corrosion, erosion, scattered powder, operation error.

05. Normal Production Loss:

• Definition: Losses occurring at plant startup, production stop, and changeover.

• Example: Production rate decreases during warm-up after start-up, cool down before production stop or changeover.

06. Abnormal production loss:

• Definition: Production losses caused by production rate decreases due to malfunctioning or abnormalities in plant.

• Example: Low-load operation, low speed operation and operation below the standard production rate.

07. Quality defect losses:

• Definition: Losses due to production of defectives and physical losses from scrap, losses from product downgrading.

• Example: Physical and time losses caused by production of products deviating from quality standard.

08. Reprocessing losses:

• Definition: Recycling losses due to sending defectives through a previous process.

• Example: Recycling by passing through earlier processes to make defectives at hand processing stage into acceptable products.

From India, Pune
Attached Files (Download Requires Membership)
File Type: png Dheeraj_Chaubey.png (252.6 KB, 25 views)
Attached Files (Download Requires Membership)
File Type: pdf TPM- 8 Plant Losses-1.pdf (479.5 KB, 83 views)

Santosh Iyer
12

As per KK Pillar logic, there are 16 types of losses.
From India, Pune
Community Support and Knowledge-base on business, career and organisational prospects and issues - Register and Log In to CiteHR and post your query, download formats and be part of a fostered community of professionals.





Contact Us Privacy Policy Disclaimer Terms Of Service

All rights reserved @ 2024 CiteHR ®

All Copyright And Trademarks in Posts Held By Respective Owners.