Seeking Welding Safety Resources: Can You Share Presentations or Accident Photos?

Dear All, please help me to forward the welding safety PowerPoint presentation or photographs of welding accidents due to the non-use of PPE.

Regards,
Preetam Deshpande
[Phone Number Removed For Privacy Reasons]

Dear Preetam,

What exactly is on your mind? Does the non-usage of PPE cause accidents, or does the usage of PPE prevent accidents? My dear friend, try to acquire in-depth knowledge. If you are a safety professional, then think about it in a positive manner.

There are many threads about welding in this forum. Please search for them. All the best.

Regards,
Abhay

Dear Preetem, Heartily welcome to our CiteHR EHS forum. We have a lot of PowerPoint presentations related to welding available on our forum. Please use the search tab. If you are experiencing any problems while downloading, please let me know. Keep in touch. Regards

I am attaching a PPT as requested.

Regards,
Shaik Murtuza
Training Specialist

Dear Preetam Deshpande, I suggest you go through the following link. There is almost everything regarding welding. After going through the below thread, if you have any further queries, please let us know.

https://www.citehr.com/308953-safety-tips-welders.html

Dear Shaik Murtuza, thanks for sharing such a nice presentation with us. Really great one. Thanks & keep on sharing with us.

Dear Abhay, I don't find anything wrong in what the thread starter wrote in his post. Non-use of PPE can also be a cause of accidents. However, your point is also not wrong. We just have to boost up the newcomers for them to stay with us. Give positive comments and try our best to help others.

Keep on sharing and keep up the pace.

Dear All, just to add my small contribution to this discussion. The direct cause of an accident is typically an Unsafe Act or an Unsafe Condition that has been created, releasing the hazard. Loss of control of a hazard leads to accidents. Using PPE will not prevent the accident, but it will protect the individual or reduce the impact of the hazard release.

Regards,
Gopi

Dear All, just want to emphasize what I said with an example: Non-use of PPE can also be a cause of accidents. Looking forward to having a discussion on this if anyone disagrees with me.

Example of PPE Non-Use

One person was not wearing a helmet while working. Suddenly, a bolt fell on his head. If he had worn the helmet, he would not have been injured. Hence, the non-use of PPE can be a cause of accidents. If he had worn the helmet, this incident could have been classified as a near miss.

Thank you.

Non-Use of PPE as a Cause of Accidents

Just want to emphasize what I said with an example: Non-use of PPE can also be a cause of an accident. Looking forward to having a discussion on this if anyone disagrees with me.

One person was not wearing a helmet while working. Suddenly, a bolt fell on his head. If he had worn the helmet, he would not have been injured. Hence, non-use of PPE can be a cause of an accident. If he wears the helmet, this could have been converted into a Near Miss Case.

With due respect to all senior members,

Kindly ask "5 Whys" for the above case and find out if "Non-Usage of PPE" causes the accident?

Regards,
Abhay

Analysis of Contributory Causes in Safety Incidents

When analyzing the above case, you will identify a number of contributory causes. PPE non-usage is one among them, or in other words, it is the unsafe act done by the person, one of the contributory reasons. This validates once again that the non-use of PPE can cause accidents.

There are physical and systemic factors, rather than just human error, behind this case.

Dear Abhay, this time you are correct. We have to keep on asking why until we reach the key factors or root causes that lead to the accident. It may be three or it may be ten.

Hierarchy of Risk Control Measures

This is with respect to the use of PPE. The use of PPE is one of the last methods of risk control measures. The hierarchy of risk control measures is as follows:

1. **Elimination** - Eliminate the risk if possible.
2. If elimination is not possible, try substitution.
3. If substitution is not possible, try engineering controls.
4. If engineering controls are not feasible, try administrative controls like a work permit system.
5. If administrative controls are not possible, then resort to using PPE.

Regards,
T.S. Srinivasan

Dear Abhay,

I am also a safety professional. What do you think about showing some accident photos to emphasize the importance of safety for employees while working?

Regards,
Preetam

Dear Sir, some persons in my department are wearing safety goggles while working, but improvement is inadequate. Therefore, please send a PowerPoint presentation on robo welding, MIG, and spot welding so we can measure the safety parameters and reduce the near-miss trends as well as incidents. Some presentations are very nice and helpful.

Thank you,

Regards,
Tejvir Singh
Haridwar, Uttarakhand
Company - OEM