Request for Assistance: Visual Inspection Defects
Please help me with the list of possible defects that may be encountered during the visual inspection of unfired pressure vessels. Thanks in advance. Happy New Year wishes to all of you.
Regards,
SSM
From India, Madras
Acknowledge(0)
Amend(0)
47Please help me with the list of possible defects that may be encountered during the visual inspection of unfired pressure vessels. Thanks in advance. Happy New Year wishes to all of you.
Regards,
SSM
From India, Madras
Acknowledge(0)Amend(0)
Take a look at the attached files; I hope they will help you. Some of our senior members will guide you further. Keep on asking...
Note: It's not fulfilling your query entirely, but it should be helpful. If it provides a solution to your query, I would be very happy. Let me know.
Regards
From United States, Fpo
Acknowledge(1)Amend(0)
Note: It's not fulfilling your query entirely, but it should be helpful. If it provides a solution to your query, I would be very happy. Let me know.
Regards
From United States, Fpo
Acknowledge(1)Amend(0)
Dear SSM,
Following defects may be found during a detailed inspection:
1. Corrosion inside
2. Reduction in shell thickness
3. Welding joint cracks
4. Welding joint leakage
5. Safety valve non-functioning
6. Auto drain not working
7. Pressure gauge indication not proper
Maybe the above will help you!
Dear Raghu,
Thanks for the attachments. Surely good study material. I will read it when I get time. Thanks and keep on sharing. Let's keep this forum alive.
Regards
From India
Acknowledge(0)Amend(0)
Following defects may be found during a detailed inspection:
1. Corrosion inside
2. Reduction in shell thickness
3. Welding joint cracks
4. Welding joint leakage
5. Safety valve non-functioning
6. Auto drain not working
7. Pressure gauge indication not proper
Maybe the above will help you!
Dear Raghu,
Thanks for the attachments. Surely good study material. I will read it when I get time. Thanks and keep on sharing. Let's keep this forum alive.
Regards
From India
Acknowledge(0)Amend(0)
Dear SSM,
The visual defects of an unfired pressure vessel can be:
1. Rusting of the plate used.
2. Quality of the weld joint.
3. If marked, you can see when it was last tested.
4. Functioning of the drain valve.
5. Functioning of the drain valve.
After these visual checks, you can decide the next line of action.
Thanks to Raghu and Dipil for your posts on this thread.
Thanks & Regards,
Sudhir
From India, Vadodara
Acknowledge(0)Amend(0)
The visual defects of an unfired pressure vessel can be:
1. Rusting of the plate used.
2. Quality of the weld joint.
3. If marked, you can see when it was last tested.
4. Functioning of the drain valve.
5. Functioning of the drain valve.
After these visual checks, you can decide the next line of action.
Thanks to Raghu and Dipil for your posts on this thread.
Thanks & Regards,
Sudhir
From India, Vadodara
Acknowledge(0)Amend(0)CiteHR is an AI-augmented HR knowledge and collaboration platform, enabling HR professionals to solve real-world challenges, validate decisions, and stay ahead through collective intelligence and machine-enhanced guidance. Join Our Platform.
Safety inspection checklist2.doc
What your Safety Officer wanted.pdf