Loginmiraclelogistics
Asso.prof.(commerce & Management)
Glidor
Hr Consultant

Cite.Co is a repository of information and resources created by industry seniors and experts sharing their real world insights. Join Network
There is always a confusion whether electrical conversion has to be included in list of machinery when we apply for factor license. So I need to get clarification on machinery list submission as per fartories act
From India, Karaikudi
HP calculation is done by factory manager by calculating the total power used by machinery, otherwise look at electric bill you will find it 800 Watt= 1 HP 1000 Watt = I KW

You need to provide the complete list of machinery installed/under installation in a factory. Every manual of the machinery provides complete tech.details of the machinery including the hp of the m/c. There is no common list of machinery applicable to all factory/ plant/unit. As you know machinery to be used depends on the nature of the product, size, capacity, process & extent of automation, handling requirement, logistics support etc. Therefore ask your plant head to fill these forms and annexures as may be required. This should include electrical, waste/effluent treatment & disposal, safety equipment etc.
And can you elaborate what sort of 'electrical conversion' is taking place in your process at the plant.

From India, Bangalore
This discussion thread is closed. If you want to continue this discussion or have a follow up question, please post it on the network.
Add the url of this thread if you want to cite this discussion.






About Us Advertise Contact Us
Privacy Policy Disclaimer Terms Of Service



All rights reserved @ 2020 Cite.Co™