No Tags Found!

M.Peer Mohamed Sardhar
733

Patent Illustrations

Experience:
1 - 5 Years
Location:
Delhi, Delhi/NCR, Gurgaon
Compensation:
Best in the industry.
Education:
UG - B.Tech/B.E. - Mechanical

PG - M.Tech - Mechanical
Industry Type:
BPO/ITES /CRM/Transcription
Functional Area:
Engineering Design, R&D
Posted Date:
04 Jun


Job Description
Candidate will be responsible for preparing Patent Illustrations for the US/EU market.
Desired Candidate Profile
Candidate must be:-
# A Mechanical Engineer.
# Have an expertize in AutoCAD, MS PowerPoint
# Have an experience of atleast 1-3 years in Patent Illustrations.
# Have Good communication skills, ability to learn quickly, and good people skills.

Plumbing Design Engineer
Experience:
2 - 5 Years
Location:
Bengaluru/Bangalore, Mumbai
Education:
UG - B.Tech/B.E. - Civil

PG - Post Graduation Not Required
Industry Type:
Construction/ Engineering/Cement/Metals
Functional Area:
Engineering Design, R&D
Posted Date:
04 Jun


Job Description
*Should have knowledge of designing plumbing layout for residential and commercial buildings.
*Work on Autocad
*Minimum 2yrs of Experience
Desired Candidate Profile
*Should have knowledge of designing plumbing layout for residential and commercial buildings.
*Work on Autocad
*Minimum 2yrs of Experience

Design Engineer
Experience:
3 - 5 Years
Location:
Mumbai
Compensation:
Rupees 2,00,000 - 3,00,000
Education:
UG - Diploma - Engineering

PG - Other
Industry Type:
Pharma/ Biotech/Clinical Research
Functional Area:
Engineering Design, R&D
Posted Date:
04 Jun


Job Description
Can able to handle Project Indipendantly, CAD knowledge is must, Able to work on Solid edge - modeling, Assembly & Detailing
Desired Candidate Profile
3-4 Year Experience, Working on Solidedge or any other 3D modeling software
Senior Draftsperson- Civil
Experience:
7 - 10 Years
Location:
Chennai
Education:
UG - Diploma - Civil

PG - Post Graduation Not Required
Industry Type:
Chemicals/ PetroChemical/Plastic/Rubber
Functional Area:
Engineering Design, R&D
Posted Date:
04 Jun


Job Description
ITI /Diploma In Civil Engineering;7-10 years of experience in civil/Structural Drafting & Detailing
Desired Candidate Profile
Proficiency in AutoCAD /Xsteel detailing.
Familiarity with concrete/ steel structures.
Familiarity in preparation of fabrication drawing Exposure in various codes (IS Codes/AISC/BS ).
The ability to check the drawings and guide the draftspersons
Design Manager
Experience:
10 - 15 Years
Location:
Mumbai
Compensation:
Rupees 15,00,000 - 25,00,000
Education:
UG - B.Tech/B.E. - Civil, Electrical

PG - Any PG Course - Any Specialization
Industry Type:
Oil and Gas/ Power/Infrastructure/Energy
Functional Area:
Engineering Design, R&D
Posted Date:
04 Jun


Job Description
Reports to: Head (Engineering Services)
Role (1-2 lines): Responsible for primary engineering, secondary engineering, protection,
SCADA/Automation and Civil designing of Substations.
Desired Candidate Profile
Reports to: Head (Engineering Services)
Role (1-2 lines): Responsible for primary engineering, secondary engineering, protection,
SCADA/Automation and Civil designing of Substations.


Fluids Specialist Aerospace and Turbomachinery
Experience:
1 - 4 Years
Location:
Pune
Education:
UG - B.Tech/B.E. - Automobile, Aviation, Chemical, Civil, Mechanical, Metallurgy

PG - M.Tech - Automobile, Aviation, Chemical, Civil, Mechanical, Metallurgy

PPG - Ph.D/Doctorate - Mechanical
Industry Type:
IT-Software/ Software Services
Functional Area:
Engineering Design, R&D
Posted Date:
04 Jun


Job Description
Job Description:

The Fluids Specialist Aerospace and Turbomachinery will proactively consult with ANSYS Aerospace and turbo machinery customers, playing a lead role in managing important accounts with significant impact on revenues for software and value-added consulting services. The Fluids Specialist Aerospace and Turbomachinery will:
  • Work collaboratively with software customers to ensure their successful use of ANSYS Fluid based products.
  • Contribute advanced technical guidance on range of aerospace and turbo machinery flow simulations including external flow simulations, internal flow systems, turbines, compressors, blowers, etc.
  • Understand and develop best practices/procedures for various Aerospace and turbo machinery application.
  • Develop and strengthen long-term relationships with customers
  • Assist Sales and Marketing units in sales campaigns and strategic market development .
  • Guide in-house efforts in expanding customer accounts.
  • Use services to promote new software license sales and expansions
Desired Candidate Profile
Candidate Profile:
  • Ph.D. or Masters in Mechanical or Aerospace Engineering.
  • Sound background in fluid mechanics, heat transfer and CFD.
  • Excellent communication skills (both oral and written).
  • Experience in applying CFD to aerospace and turbo machinery field.
  • Demonstrated ability to manage multiple projects/tasks.
  • Demonstrated problem solving skills, ability to create engineering solutions to customer problems
  • Should be interested in working with the customers and willing to travel.
  • Should be team player and willing to pitch in at various fronts to help grow a successful business
Designation
Engineer - Electrical
Job Description
Prepares design for an assigned system. This may include analysis, calculations, research, selection, layout, etc., necessary to develop required design documents. Prepares design materials for basic design assignments.
Supervises drafters, designers, and occasional subordinate engineers assigned to the project. This includes work assignments, scheduling, and review.
Coordinates design efforts with other project personnel in the same or other departments. Coordinated items include space control, schedule and layout optimization.
Evaluates manufacturer's or contractor's proposals, data, reports, etc., for conformance with B&V criteria.
Prepares assigned reports, studies or analysis for project. Has day-to-day contact with clients. Produces bespoke correspondence and contributes to documents that contain specialists/technical material.
Maintains records, lists, schedules, etc., for engineering projects. May be working towards a specialist/professional qualification. Ability to undertake technical/specialist work. Required to have intermediate skills (e.g. team supervision, use of systems, software packages, and/or databases).
Responsible for day-to-day decisions within agreed guidelines and professional constraints with some supervision required. Accountable for meeting own targets/deadlines and ensuring quality of own service provision.
Planning horizon for work is typically short term.
Organises own workload in consideration of directed priorities and system requirements.
Desired Profile
Preparing detailed design, preparation of load schedules, equipment sizing, cable sizing, ingle line diagrams, design of lighting, earthing and lightning systems, development of plant layouts, specifications and enquiry documents, knowledge of relevant IS/BS/IEC/IEEE/NEC/NFPA standards and ETAP/SKM power Tools/Amtech Software.
Experience
3 - 6 Years
Industry Type
Construction/ Engineering/Cement/Metals
Functional Area
Engineering Design, R&D
Education
UG - B.Tech/B.E. - Electrical
PG - M.Tech - Electrical
Location
Mumbai
Keywords
electrical engineer, water, waste water, desalination, water treatment

Designation
Stress Analysis Engineer
Job Description
Responsibilities include pre and post processing using Hypermesh and Analysis using Nastran. Components analysed include compressor frames, rotors, housings etc. Type of analyses include linear static, dynamic and non-linear calculations. Interaction with overseas Atlas Copco customer's on a regular basis is required. Willingness to learn and work on optimization using Optistruct is also required.
Desired Profile
The ideal candidates shall be M.E. M.Tech. with atleast 2 years of experience in liner non-linear static dynamic stress analysis. Hands on experience on Hypermesh Nastran is essential. Experience with topology optimization using Optistructan is an added advantage.
Experience
2 - 4 Years
Industry Type
Industrial Products/Heavy Machinery
Functional Area
Engineering Design, R&D

Manager - Mechanical Equipment Design
Experience:
10 - 15 Years
Location:
Chennai
Compensation:
Rupees 8,00,000 - 12,00,000
Education:
UG - B.Tech/B.E. - Mechanical

PG - M.Tech - Mechanical
Industry Type:
Construction/ Engineering/Cement/Metals
Functional Area:
Engineering Design, R&D
Posted Date:
03 Jun


Job Description
Capable of designing static heat & Mass transfer process equipments like pressure vessel, Heat Exchanger, storage tank, cooling tower & filter, Air filter, Silencer & dumpers.
Exposure to cryogenic process equipments is preferred.
Desired Candidate Profile
Participates as a primary contributor on project and technical teams.
Implements & authors improvements to the work processes with guidance of others.
Trains newer professionals & provides technical guidance to teams.
Develops engineering criteria, reviews designs & documentaion to ensure compliance with standards
Keeps current with state of the art tools, design practices & concepts.
Anticipates problems and develops contigencies
Authorises specifications & technical bid evaluation.

From India, Coimbatore
M.Peer Mohamed Sardhar
733

Sr. Engineer (civil and structure)
Experience:
8 - 10 Years
Location:
Noida
Education:
UG - B.Tech/B.E. - Civil

PG - M.Tech - Civil
Industry Type:
Oil and Gas/ Power/Infrastructure/Energy
Functional Area:
Engineering Design, R&D
Posted Date:
04 Jun


Job Description
Job title :- Sr. engineer ( civil and structures)
Qualification:-B.E. or B. Tech. or M. Tech .
Experience :- 8 yrs-10 yrs
  • KRA :- Must be conversant with IS code and International codes. Expert in STAAD Pro Software. Experience in oil and Gas Company preferred . Candidate should have worked in the Design office of Oil and Gas , Refinary, petrochemical Industry .
Desired Candidate Profile
KRA:- Must be conversant with IS code and International codes.Expert in STAAD Pro Software.Experience in oil and Gas Company preferred .Candidate should have worked in the Design office of Oil and Gas , Refinary, petrochemical Industry .
Sr.Power Electronics Engineer
Experience:
6 - 11 Years
Location:
Visakhapatnam
Compensation:
Rupees 3,25,000 - 8,25,000
Education:
UG - B.Sc - Electronics;B.Tech/B.E. - Electronics/Telecomunication

PG - M.Sc - Electronics
Industry Type:
Semiconductors/ Electronics
Functional Area:
Engineering Design, R&D
Posted Date:
03 Jun


Job Description
Senior level electronics engineer with power electronics / analog circuit design experience in ballasts and other types of lighting power supplies. The engineer will be a key member of our engineering development team that designs and develops circuits, power supplies, wiring and test systems. This Senior engineer will be responsible for Product Design & Development of LED power supplies and controls for Solid State Lighting applications. This entails electrical design of the LED drive circuits for AC or DC input, voltage-controlled or current-controlled systems, and feedback systems.
* Demonstrated competencies in power electronics, analog design & feedback control - design, analysis, breadboarding and testing
* In-depth working knowledge of Lighting Electronics is a necessity.
* Proficiency in micro-controller based systems - hardware & software design and implementation.
* Develops comprehensive approaches to meeting technical objectives, and performs product design and development with a high degree of independence.
* Demonstrates creativity to support innovation & technology development.
* Performs competitive benchmarking in conjunction with product management.
* Manages product development process from concept through launch
* Must be familiar with EMC / EMI requirements.
Desired Candidate Profile
Perform reliability studies on products and components to assure product quality and life.
* Requires project leadership skills with good understanding of product
development processes.
* Requires good oral and written communication skills, and working in team
environments.
*Contribute to cross-functional project team composed of electrical, mechanical, and manufacturing engineers to develop products from concept into production
* Preparation of product documentation and specifications for manufacturing operations, product testing, qualification and regulatory agencies.
* Demonstrating creativity to support innovation & technology development.
* Interfacing with cross-functional departments: marketing, manufacturing,
quality and senior management, and external customers.
* Managing product development, planning, coordinating, and reporting.
* Supporting continuous improvement of products and processes.
* Serve as technical lead and professional mentor to junior engineers and interns.
* Power supply design, development, qualification, and regulatory compliance (UL and CE)
* PCB design (Circuit Schematic capture, PCB Layout and simulation CAD software )
* Produce Bill of Materials
* Test and analysis
* Design Reviews
* Support Manufacturing during production
* Support special projects assigned by management.
Designation
Electrical Lead Engg - Design
Job Description
1. To prepare Design Basis based on RFP.
2. To prepare equipment specifications.
3. To validate consultants documents/drawings.
4. To have system overview of the various disciplines for cross function informations.
5. To interact with vendors ,consultants & internal clients.
6. To help procurement department technically in procuring reliable & energy efficient equipments
7. To resolve site related queries /problems.
8. To assist in commissioning
Desired Profile
BE / B. Tech in Electrical Enggineer First Class with 12 to 15 years experience in
1. Consultancy firm as designer
2. Project Engg Group of reputed Company
3. In IDC / Infrastructure Company
Experience
12 - 15 Years
Industry Type
Construction/ Engineering/Cement/Metals
Functional Area
Engineering Design, R&D
Education
UG - B.Tech/B.E. - Electrical
PG - Any PG Course - Any Specialization
Location
Mumbai
Keywords
Electrical Design

Sr. Engineers / Design Engineers- (Mechanical).
Experience:
3 - 5 Years
Location:
Noida
Compensation:
Salary shall not be a bar for the suitable candidate
Education:
UG - B.Tech/B.E. - Mechanical

PG - Any PG Course - Any Specialization
Industry Type:
Oil and Gas/ Power/Infrastructure/Energy
Functional Area:
Engineering Design, R&D
Posted Date:
03 Jun


Job Description
The candidate should be able to prepare Manufacturing and Fabrication Drawings of Components on AutoCAD 2008.
-The candidate should be able to prepare Assembly Drawings and Bill of Materials for the manufacturing drawings.
-He should be able to carry out Development of Fabricated Components like truncated cones or inclined cones for Hydraulic Assemblies like spiral casing and draft tube etc.
-He should also be Conversant with Mechanical hardware items base on ISO and IS Standards and having a good Knowledge of steel and stainless steel materials.
Desired Candidate Profile
The candidate should be Mechanical Engineering and should have minimum 3-4 years Experience in the Design Engineer Department. Candidate having experience of working in Hydro Power Plant / Pumps design industry shall be given preference.





Product development engineer-OEM(Interior/Electrical)


Experience:
3 - 8 Years
Location:
Chennai
Compensation:
Rupees 2,75,000 - 7,75,000
Education:
UG - B.Tech/B.E. - Any Specialization

PG - Any PG Course - Any Specialization
Industry Type:
Auto/Auto Ancillary
Functional Area:
Engineering Design, R&D
Posted Date:
03 Jun


Job Description
OEM Requirement:
Design and Development ofPowerTrain/Chassis.
(Offered candidates would be working for OEM under the payrolls of RGBSI)
Products
Base Engine/Breaks/Steering/
FWD Transmission/RWD Transmission
/Engine adaptation/Trans Adaptation
/suspension/ P/T simulations/integration
/Frames/Cradles/ P/T Embedded systems/Materials.
Desired Candidate Profile
Desired Profile: Candidates should have hardcore development and design experience in Powertrain/Chassis.Candidates should possess good communication skills. KNOWLEDGE IN CATIA V4 / V5, MAINFRAME SYSTEMS (ODCICS2, PDB, VPM, JTETSO, FASTCAR), ECIMS, CN & WARRANTY SYTEMS HIGHLY DESIRABLE.
EDUCATION-TRAINING-REQUIREMENTS: BS IN ME / EE OR EQUIVALENT REQUIRED. MASTERS DEGREE IN ENGINEERING OR BUSINESS PREFERRED.

CATIA - Sr.Design Engineers - Seating Systems

Experience:
3 - 5 Years
Location:
Bengaluru/Bangalore
Compensation:
Best in the Industry
Education:
UG - B.Tech/B.E. - Mechanical

PG - M.Tech - Mechanical
Industry Type:
IT-Software/ Software Services
Functional Area:
Engineering Design, R&D
Posted Date:
03 Jun


Job Description
To carry out various design activities, such as Styling, Conceptual Design, Product Design & Development, 3D Surface & Solid modeling, 2D Drafting & Detailing, GD&T, Tool & Fixture Designs
Desired Candidate Profile
Should be proficient in Automotive Interior and Seating Systems
Should be proficient in CATIA V5 3D Surface/Solid Modeling, Assembly, 2D Drafting & Detailing and GD&T.

Designation
Structural Engineer
Job Description
Key Area of work experience
i.Off Shore structures
ii.Oil and Gas
iii.Power Sector
Skill Set
oSound Knowledge structural mechanics
oSTAAD.pro or similar tools
oFEA (Finete element analysis) tool like Ansys, SAX.
Desired Profile
Educational Qualification: - BE/B.Tech (Civil/Mech.)
Preferably with Masters in structures
Experience 4 to 10 years
Experience
5 - 10 Years
Industry Type
Oil and Gas/ Power/Infrastructure/Energy
Functional Area
Engineering Design, R&D
Education
UG - B.Tech/B.E. - Civil, Mechanical
PG - Any PG Course - Any Specialization
Location
Bengaluru/Bangalore,
United Kingdom (UK)
Keywords
structural mechanics

From India, Coimbatore
M.Peer Mohamed Sardhar
733


Jr Manager- R & D (Vehicle Testing)


Experience:
2 - 7 Years
Location:
Bhopal
Compensation:
Rupees 2,50,000 - 4,00,000
Education:
UG - B.Tech/B.E. - Agriculture, Automobile, Mechanical, Production/Industrial;Diploma - Mechanical, Other Specialization

PG - Post Graduation Not Required
Industry Type:
Auto/Auto Ancillary
Functional Area:
Engineering Design, R&D
Posted Date:
04 Jun


Job Description
To carry out Vehicle and Transmission testing of the Tractors in the R & D and suggest/ carry out corrective action.
Desired Candidate Profile
Should have worked in the R & D of any vehicle (preferably Tractor) manufacturer and carried out Vehicle and Transmission Testing.

Patent Electronics



Experience:
2 - 3 Years
Location:
Delhi, Delhi/NCR
Compensation:
Best in the industry
Education:
UG - B.Tech/B.E. - Electronics/Telecomunication

PG - M.Tech - Electronics/Telecomunication
Industry Type:
BPO/ITES /CRM/Transcription
Functional Area:
Engineering Design, R&D
Posted Date:
04 Jun


Job Description
Candidate will be responsible for:

1. Drafting the patents in Electronics/ Communication/ Telecommunication domain.
2. Searches like prior art search, validation/ invalidation searches in Electronics/ Communication/ Telecommunication domain.
Desired Candidate Profile
Candidate must be B.Tech / M.Tech in Electronics and Telecommunication from tier 1 or tier 2 institutes as IIT, REC's, BITS.

Candidate must be currently working in Telecommunication/ Electronics based industry.

Candidate must have 2 years of relevant experience.

'Freshers can also apply but must be M.Tech in Electronics/ Communication/ Telecommunication'

B.Tech freshers are not required.

Senior Engineer (R&D) for SMPS (Power Supply) & Battery Chargers.
Experience:
3 - 5 Years
Location:
Delhi
Compensation:
Negotiable
Education:
UG - B.Tech/B.E. - Electronics/Telecomunication

PG - M.Tech - Electronics/Telecomunication
Industry Type:
Semiconductors/ Electronics
Functional Area:
Engineering Design, R&D
Posted Date:
03 Jun


Job Description
Complete designing of SMPS, alonb with magnetic DC-DC Converters, Battery Chargers from circuit conceptualization to final Product.
Desired Candidate Profile
M.Tech /M.E/B.Tech/B.E in Electronics with Design Experience in SMPS and its magnetic .
Exposure to Power Electronics/Battery Chargers
Exposure to PCB Design, EMI, EMC, Standards. CE Certification.
ESD Standards etc.

Designation
Embedded System Dev Engineer (Automotive Domain)
Job Description
Knowledge of developing 8/16/32 bit microcontroller based system for automotive solutions in following areas:

Powertrain Management (engine control module, transmission control module etc.)

Body electronics (body control module, smart junction box, diagnostic tools etc.)

Vehicle safety systems (tire pressure monitoring system, collision avoidance system, antilock brake system etc.)

Vehicle security system (keyless entry, immobilizer etc.)

Instrument Cluster

Driver assistance system (parking assistance, night vision, cruise control etc.)

Telematics and infotainment

Battery and power management

Candidate should work experience in at least 4 of above areas.
Desired Profile
Minimum 3 years of relevant experience in automotive embedded system domain (min 4 years of total experience).
Experience
3 - 7 Years
Industry Type
Auto/Auto Ancillary
Functional Area
Engineering Design, R&D
Education
UG - B.Tech/B.E. - Electrical, Electronics/Telecomunication
PG - M.Tech - Any Specialization
Location
Chennai
Keywords
Embedded, Automotive

CAD Engineer for plastic products
Experience:
3 - 6 Years
Location:
Pune
Compensation:
CAD Engineer for plastic products at Pune
Education:
UG - B.Tech/B.E. - Any Specialization; Diploma - Any Specialization
PG - Post Graduation Not Required
Industry Type:
Other
Functional Area:
Engineering Design, R&D
Posted Date:
31 May


Job Description
3 years + exp. in product design and development with OEMs like Auto, Appliances, medical equipment, instrumentation etc. Proficient in SolidEdge (Prefer ver 19). Sound knowledge of processes like injection and blow moulding, sheet metal etc.
Desired Candidate Profile
3 years + exp. in product design and development with OEMs like Auto, Appliances, medical equipment, instrumentation etc. Proficient in SolidEdge (Prefer ver 19). Sound knowledge of processes like injection and blow moulding, sheet metal etc.

R & D - Officer / Exe.Manager for Adhesive
Experience:

3 - 8 Years
Location:
Noida
Compensation:
Rupees 1,50,000 - 4,00,000
R & D - Officer / Exe.Manager for Adhesive
Education:
UG - B.Sc - Chemistry;Diploma - Chemical
PG - M.Sc - Chemistry;PG Diploma - Chemical
Industry Type:
Chemicals/ PetroChemical/Plastic/Rubber
Functional Area:
Engineering Design, R&D
Posted Date:
30 May


Job Description
1. Exp. should be in Chemicals/polymers/Synthetic / resin/ adhesives/polyurethane/polyester
2. Exp. should be in Adhesives- R & D
3. Good knowledge of Laboratory practices in Synthetic / Analytical work.
4. Qualification should be M.Sc/organic/in-organic/ polymer Science/Dip.in Chemicals
Desired Candidate Profile
1. Exp. should be in Chemicals/polymers/Synthetic / resin/ adhesives/polyurethane/polyester
2. Exp. should be in Adhesives- R & D
3. Good knowledge of Laboratory practices in Synthetic / Analytical work.
4. Qualification should be M.Sc-organic/in-organic/ polymer Science/Dip.in Chemicals
Dy GM - Pharma Technology Development
Experience:

15 - 20 Years
Location:
Mumbai
Compensation:
Rupees 14,00,000 - 15,00,000
DGM-Pharma Technology Development
Education:
UG - B.Pharma - Pharmacy
PG - M.Pharma - Pharmacy
Industry Type:
Pharma/ Biotech/Clinical Research
Functional Area:
Engineering Design, R&D
Posted Date:
04 Jun


Job Description
Design & development of products for regulated markets.
Process modification to improve final output, reduce the processing time and improve quality parameters.
Designing procedures and documentation including guidelines, QAPs to develop products for regulated markets.
Designing the documentation necessary for regulatory submission including ANDA, CTD etc.
Designing stability protocols as per the requirement for various regulatory bodies.
Vendor approval studies
Improvisation of existing products
Desired Candidate Profile
M Pharma or PhD with relevant exposure to designing and developing of product for regulated markets and shall report to VP-pharma technology development .


Program Manager (Aerospace - R & D)
Experience:

12 - 15 Years
Location:
Bengaluru/Bangalore
Education:
UG - B.Tech/B.E. - Electronics/Telecomunication
PG - M.Tech - Electronics/Telecomunication
Industry Type:
Construction/ Engineering/Cement/Metals
Functional Area:
Engineering Design, R&D
Posted Date:
03 Jun


Job Description
Design, Development of Digital and Analog hardware with Microcontroller, Microprocessor, DSP Programming.
Hands on work experience in these areas of at least three years as Project Manager .
Desired Candidate Profile
(a)Experience in Design and development of (i) Digital, Analog and Mixed Signal Circuits (ii) Embedded Systems using Microprocessors, Microcontrollers and Digital Signal Processors
(b)Expertise in Assembly and C Programming

DEPUTY MANAGER (PRODUCT DESIGN & DEVELOPMENT)
Experience:

4 - 8 Years
Location:
Delhi/NCR, Faridabad
Compensation:
SALARY NOT A CONSTRAINT FOR THE RIGHT CANDIDATE
Education:
UG - B.Tech/B.E. - Mechanical
PG - Any PG Course - Any Specialization
Industry Type:
Pharma/ Biotech/Clinical Research
Functional Area:
Engineering Design, R&D
Posted Date:
30 May


Job Description
RESPONSIBLE FOR SMOOTH PRODUCTIONISATION FROM R&D TO
PRODUCTION
FMEA IMPLEMENTATION & FOLLOW UP,
INTERNAL AUDIT, DOCUMENTATION, DESIGN & PROCESS IMPROVEMENT
SOP PREPERATION & IMPLEMENTATION,
CONCEPTUAL DESIGN- FOR ASSEMBLY FIXTURES
Desired Candidate Profile
A SELF STARTER & RESULT ORIENTED INDIVIDUAL HAVING EXPERTISE IN AUTO-CAD, PLASTICS, MOULDING KNOWLEDGE,
MULTICAVITY MOULDS, AUTOMATION KNOWLEDGE, TECHNICAL DOCUMENTATION, PROBLEM SOLVING SKILL, KNOWLEDGE OF SQC TOOLS, CONCEPTUAL DESIGN- FOR ASSEMBLY

From India, Coimbatore
M.Peer Mohamed Sardhar
733





Project Manager - Aero Structural Design



Experience:
10 - 15 Years
Location:
Bengaluru/Bangalore
Compensation:
Rupees 15,00,000 - 30,00,000
Education:
UG - B.Tech/B.E. - Mechanical
PG - Any PG Course - Any Specialization
Industry Type:
Auto/Auto Ancillary
Functional Area:
Engineering Design, R&D
Posted Date:
23 May


Job Description
Should have strong exposure to Aero Structural Design - Should have 10 to 15 years of experience in Aero Domain
Should be B.E. / B.Tech / M.E / M.Tech
Desired Candidate Profile
People Management Experience Required.
Atleast 4 -6 yrs of experience in Structural Design is mandate.
Design Manager


Experience:
10 - 15 Years
Location:
Delhi/NCR,
Delhi
Education:
UG - B.Tech/B.E. - Mechanical

PG - M.Tech - Mechanical
Industry Type:
Consumer Durables
Functional Area:
Engineering Design, R&D
Posted Date:
19 May


Job Description
Designing of package & ductable split & transport/mobile air-conditioners.
Designing of heat exchanger / coils for air-conditioning & refrigeration industry.
Desired Candidate Profile
Should have extensive experience in designing heat exchangers / coils for air-conditioning systems.

Patent Analyst


Experience:
1 - 5 Years
Location:
Delhi/NCR
Compensation:
Best in the industry.
Education:
UG - B.Tech/B.E. - Computers, Electrical, Electronics/Telecomunication
PG - M.Tech - Computers, Electrical, Electronics/Telecomunication
Industry Type:
BPO/ITES /CRM/Transcription
Functional Area:
Engineering Design, R&D
Posted Date:
04 Jun


Job Description
Candidate will be responsible for:-
# Conducting Prior Art Searches .
# Conducting Validation/ Invalidation Information.
# Conducting Patentability Information.
# Conducting Landscape Mapping.
# Conducting Infringement Information.
Desired Candidate Profile
Candidate must be:-
# B.Tech/ M.Tech. (Electricals/ Electronics/ Computer Sciences) from NIT, REC, IIT.
# Must have 70% above throughout.
# 1 year experience in R&D with Electronics/ IT companies.
# Must be willing to pursue his/her career in Intellectual Property Rights.
Asst. General Mangaer - R&D Polysaccharide Vaccines
Experience:

8 - 12 Years
Location:
Anantapur, Guntakal, Guntur, Hyderabad / Secunderabad, Kakinada, Kurnool, Nellore, Nizamabad, Tirupati
Compensation:
Salary is not a constraint to Good candidature
Education:
UG - B.Sc - Chemistry

PG - M.Sc - Chemistry

PPG - Ph.D/Doctorate - Chemistry
Industry Type:
Pharma/ Biotech/Clinical Research
Functional Area:
Engineering Design, R&D
Posted Date:
03 Jun


Job Description
Qualifications:

First class M.Sc. Chemistry/Biochemistry or M.Tech. Chemical Engg./Biotech Engg., from Central Universities or IITs.

Ph.D. in the area of Polysaccharide chemistry or protein chemistry with one or two publications in international referred journals.

Experience:

Able to head a group of 8-10 Process and Analytical Sscientists and capable of leading a team in development of bench to pilot scale product. Should be conversant with the conceptualization of the project requirements, designing, planning and delegating the functions down the line and complete administration of the project. He should lead the documentation efforts and develop the research summaries as per regulatory guidelines.
Desired Candidate Profile
Able to head a group of 8-10 Process and Analytical Sscientists and capable of leading a team in development of bench to pilot scale product. Should be conversant with the conceptualization of the project requirements, designing, planning and delegating the functions down the line and complete administration of the project. He should lead the documentation efforts and develop the research summaries as per regulatory guidelines.

PH.D / M.Sc.- DM / AM- R & D Professionals-Agri/Food Tech -North India



Experience:
4 - 8 Years
Location:
different parts UP
Compensation:
Rupees 4,00,000 - 7,00,000
Education:
UG - B.Sc - Food Technology
PG - M.Sc - Food Technology
PPG - Ph.D/Doctorate - Food Technology
Industry Type:
Agriculture/Dairy
Functional Area:
Engineering Design, R&D
Posted Date:
22 May


Job Description
will be responsible for R & D functions.
candidates with having exp. in food /fruits/agriculture.
candidates who can relocate into different parts of India only apply.
Desired Candidate Profile
will be responsible for R & D functions.
candidates with having exp. in food /fruits/agriculture.
candidates who can relocate into different parts of India only apply.


Asstt Mgr / Manager/ Sr.Mgr QC-Civil,Mech n Elect



Experience:
10 - 15 Years
Location:
Rosa , Sasan
Compensation:
Rupees 5,50,000 - 14,00,000
Education:
UG - B.Tech/B.E. - Civil, Electrical, Mechanical

PG - Any PG Course - Any Specialization
Industry Type:
Oil and Gas/ Power/Infrastructure/Energy
Functional Area:
Engineering Design, R&D
Posted Date:
24 May


Job Description
Overall Supervision of Quality Assurance and Quality Control. Overall supervision on the quality check, of all the teams handling various projects, setting guidelines and modification at regular intervals for the smooth function of the entire system.
Desired Candidate Profile
Knowledge of Issuing project quality plan, evaluation of suppliers, quality control inspection, corrective action.Preparing & maintaining project wise quality assurance plan.Implementation of QAP at site & at vender works.will be based at site only.

Q.C. Manager


Experience:
5 - 7 Years
Location:
Delhi
Compensation:
Best in the industry
Education:
UG - B.Tech/B.E. - Electrical

PG - Post Graduation Not Required
Industry Type:
Industrial Products/Heavy Machinery
Functional Area:
Engineering Design, R&D
Posted Date:
04 Jun


Job Description
You should lead the Q.C. Inspection Group, Familier with quality processes, Bold administrative, Knowledge in Switchgear line will be preffered, I.S.O. 9001:2000 knowledge an advantage. B.E. Diploma in Electrical Engg.fully responble for quality control.
Desired Candidate Profile
will be leader of team of Q.C. Concerned

Asstt Mgr / Manager/ Sr.Mgr QC-Civil,Mech n Elect



Experience:
10 - 15 Years
Location:
Rosa , Sasan
Compensation:
Rupees 5,50,000 - 14,00,000
Education:
UG - B.Tech/B.E. - Civil, Electrical, Mechanical

PG - Any PG Course - Any Specialization
Industry Type:
Oil and Gas/ Power/Infrastructure/Energy
Functional Area:
Engineering Design, R&D
Posted Date:
24 May


Job Description
Overall Supervision of Quality Assurance and Quality Control. Overall supervision on the quality check, of all the teams handling various projects, setting guidelines and modification at regular intervals for the smooth function of the entire system.
Desired Candidate Profile
Knowledge of Issuing project quality plan, evaluation of suppliers, quality control inspection, corrective action.Preparing & maintaining project wise quality assurance plan.Implementation of QAP at site & at vender works.will be based at site only.



Manager / Dy Manager QA (Projects)



Experience:
7 - 12 Years
Location:
Mumbai
Education:
UG - B.Tech/B.E. - Any Specialization

PG - Any PG Course - Any Specialization
Industry Type:
Construction/ Engineering/Cement/Metals
Functional Area:
Engineering Design, R&D
Posted Date:
06 May


Job Description
Candidate should experience in Implementation of ISO: 9001.
Quality Monitoring of entire Project.
Desired Candidate Profile
Candidate should have rich experience in QA departments of Projects and Implementing of ISO: 9001 standards.


From India, Coimbatore
ab2bigb
Hi ,
We JOB A POINT Placement are pleased to introduce ourselves
as Recruitment Consultants & labour contractor providing services
to Technical Industries, Pharmaceutical Industries, Chemical Industries
& Corporate Sector at All India.
We will help you out with your requirements, if
you are looking for a new vendors please do revert me back.
I am sure my team can close the positions in a week's time.
Just need a chance to prove the quality of my company.
thanking you
Regards
JOB A POINT
AB- 09920 146 819

From India, Mumbai
Community Support and Knowledge-base on business, career and organisational prospects and issues - Register and Log In to CiteHR and post your query, download formats and be part of a fostered community of professionals.





Contact Us Privacy Policy Disclaimer Terms Of Service

All rights reserved @ 2024 CiteHR ®

All Copyright And Trademarks in Posts Held By Respective Owners.