Suliman
Hello all,
I am putting together a Position Management Plan that spells for management the material they need to submit to HR for us to conduct
the position/organization analysis.
I want to them to submit 3 things:
1) Position description for every position
2) Org analysis
3) charts/table show their position management efficiency.
Does anyone familiar with designing position management plan for US based companies? Your input will be appreciated.
Suliman/Atlanta

From United States
leolingham2000
260

SULIMAN,

I agree with the request you have made to the managers.

IT MAY BE USEFUL TO GIVE THE MANAGERS SOME USEFUL

GUIDELINES /POLICY, WHICH WILL HELP THEM TO RESPOND MORE

EFFECTIVELY TO YOUR REQUEST.

PLUS A SAMPLE COMPLETED FORMAT , WHICH THEY

CAN REFER TO.

Position Management Plan

SAMPLE policy GUIDELINES.

It is the policy of the company to deliver its programs of service and achieve its objectives through sound management practice. A basic part of this practice is effective and economical position management.

Position management involves the design and control of individual positions to achieve a proper balance of values among the following management consideration:

· number of positions;

· total cost of service;

· maximum use of scarce or costly manpower skills;

· maximum attraction, retention, and motivation of competent personnel

· provision for maximum development opportunities;

· effective use of work processes, equipment, and techniques; and

· clear delineation of duties and responsibilities.

Good position management reflects the composite resolution of these often conflicting values.

Position management is inherently the responsibility of managers and supervisors. Staff assistance in this area is available to management from the Office of HR

POSITION DESIGN

Position design is the structuring of work assignments to achieve organizational goals with the best use of manpower most readily available and by avoiding unnecessary competition for personnel in short supply. Each agency and each program of service in State government is in competition for scarce manpower, funds, and space resources. These represent actual and imposed controls or limitations. Position design has as its goal the improved management of positions within the limitations of available resources. Line managers have many factors to consider in designing positions. These include labor market resources, equipment or work process alternatives, pay competition, competing demands for funds and space, overall goal or program priorities, training possibilities, and many others. To assist management with data collection and analysis of the many considerations, staff assistance, both from within the agency and resources of other staff agencies, should be used.

Position design is accomplished by systematically following several guides which are keys to developing facts necessary to good position design and management:

· Analyzing the mission and objectives of the organization.

· Determining the tasks to be performed in accomplishing objectives,

· Determining the most efficient methods, work processes, equipment, and techniques for performing identified tasks,

· Designing positions by grouping tasks together on the basis of the most effective use of available manpower skills, and

· Continuously reviewing assignments and restructuring work of positions, including vacancies, to maintain efficiency and economy on a current basis.

POSITION ANALYSIS

In the successful accomplishment of position management, there is a need to define the nature of positions, relative to the mission and dynamics of the organization. Position analysis is the process of describing and evaluating the different kinds and levels of work found in the organization and grouping positions with similar kinds of work on the basis of major factors such as qualification requirements, responsibility, difficulty, and working conditions. Position analysis involves the application of accepted techniques of position or job evaluation to produce a systematic classification plan that forms the basis for an equitable and logical pay plan, meaningful standards of recruitment and selection, identification of training needs, a framework for performance evaluation, and information to support management in planning, budgeting, and maintaining the organization.

Basic to an understanding of position analysis are the concepts of a position or job class.

A position or job is a group of duties and responsibilities assigned by competent authority to be performed by one individual employed on a full-time or part-time basis.

A class is a group of positions which are so similar in duties and responsibilities that they justify common treatment in selection, compensation, and other employment processes and the same description title may be used to designate all positions or jobs in the class.

CLASSIFICATIONS PLAN

The HR DEPT., subject to the approval of the MANAGEMENT , establishes policies and rules governing a position classification plan which shall provide for the classification and reclassification of all positions.

The HR DEPT., is authorized to allocate and reallocate individual positions consistent with the established classification and pay plan.

The classification plan for the company consists of all classes established by the management , together with procedures for maintaining the plan and standards for each class. In grouping positions into classes, they are first grouped by the type of work, for example, clerical, trades, accounting, or manufacturing etc.. Second, the duties and responsibilities are evaluated or weighted to determine their relative level. This evaluation process involves the examination of the relative presence and degree of common factors such as difficulty of work, job requirements, responsibility, supervision, personal contact, and working conditions

CLASSIFICATION STANDARDS

For each class established by the HR/MANAGEMENT , a class standard is prepared. Standards may be written in several forms. The most frequently used are specifications and benchmarks.

CLASS SPECIFICATIONS

A class specification is a generalized description of the duties and responsibilities characteristic of positions which comprise a class; it is not intended to describe all the duties of each position in the class but rather to give a composite view of the class so as to set it apart from other classes. Each class specification includes the following sections: (1) Class Title, (2) Description of Work, (3) Examples of Duties Performed and (4) Recruitment Standards, including (a) knowledge, skills, and abilities; (b) minimum education and experience; and (c) special requirements.

· Class Title - The class title is the official title to be used for payroll, position control and other personnel and budget records. It does not preclude the use of more specific working titles, if individual managers so desire.

· Description of Work - This section describes by a general statement and then by more detailed statements the type of work and responsibilities which characterize the class. A consideration of such factors as variety and difficulty of work, work hazards, relative independence of action, supervision received and exercised, and other distinguishing features are also included.

· Examples of Duties Performed - The heading of this section states accurately what its purpose is; namely to illustrate a more specific picture of the duties assigned to positions in the class in terms of typical examples rather than an all-inclusive list of assignments. It does not define or limit the duties which may be assigned to an employee, and individual positions in the class will involve duties which are not listed.

RECRUITMENTS STANDARDS

· Knowledge, Skills and Abilities - Knowledge, skills, and abilities set forth the requirements of employees for successful work performance in positions allocated to the class. They are written in terms of what is required of new employees at time of appointment or promotion. They do not specify the desirable qualifications of a thoroughly experienced employee in the class. Their purpose is to be of assistance in the recruitment, examination, and placement of applicants. They may be used also to identify training guides to develop promotability of lower level employees. Personal characteristics such as honesty, courtesy, dependability, sobriety, and industry are not mentioned; they are requirements for all employees in all classes of work in the company.

· Minimum Education and Experience - This section is a translation of the knowledge, skills, and abilities section into quantifiable training and experience standards. It is a Statement of the minimum qualification requirements which an applicant for a vacant position in the class should possess at the time of appointment. As prerequisites, these requirements for all employees in all classes of work in the company.



· Special Requirements - In this particular section are listed specific licenses or certificates needed by an employee to perform a given job. Such licenses are those required for persons engaged in certain occupations such as law, medicine, or jobs requiring the operation of dangerous equipment. This section may also be used to specify conditions of physical endurance of emotional stability highlighted by demand of positions in a class, where such conditions are primary selection factors.

BENCHMARKS

A benchmark is a description of a real position having duties and responsibilities typical of a group of jobs in an occupational category, described in terms of factors which determine the level of the position or positions. Each benchmark includes the following sections: (1) Class Title, (2) Major Duties, (3) Factor Descriptions.

· Class Title - The class title is the official title to be used for payroll, position control, and other personnel and budget records. It does not preclude the use of more specific working titles, if individual agencies so desire.

· Major Duties - This section describes the major level determining duties of the position. This list reflects duties of a specific position and is not exhaustive.

· Factor Descriptions - This section describes the relative degree of major evaluation factors present in the position. The factors described are those which are used to evaluate all positions in an occupational category. While factors are the same for all jobs in a given category of occupations, they may vary from one occupation to another. Factors which are generally common to all positions include job requirements, difficulty, responsibility, and personal contact

Minimum Education and Experience Requirements For Each Class

It shall be the policy of the company to establish job-related minimum qualification standards wherever they are practical for each class of work in the position classification plan. The standards will be based on the required skills, knowledge and abilities common to each classification. The qualification standards and job-related skills, knowledge, and abilities shall serve as guides for the selection and placement of individuals

Minimum Education and Experience Requirements for Each Class (continued

The education and experience Statements serve as indicators of the possession of identified skills, knowledge, and abilities and as guide to primary sources of recruitment; reasonable substitutions of formal education and job-related experience, one for the other, will be made. The management recognizes that a specific quantity of formal education or number of years experience does not always guarantee possession of the identified skills, knowledge, and abilities for every position in a class. Qualifications necessary to perform successfully may be attained in a variety of combinations. Management is responsible for determining specific job-related qualifications that are an addition to minimum standards;

Maintaining The Classification Plan

The HR DEPT., is generally responsible for establishing, revising and maintaining the Classification Plan for the entire COMPANY. OTHER DEPT. heads may report the need for classification action; or the HR DEPT may initiate studies of single positions, occupational groups, or organizational groups of positions to determine that classifications are current. While central control of the Classification Plan is retained by the HR DEPT, the maintenance of the plan is the responsibility of everyone concerned with employment. This includes individual employees, immediate supervisors, and agency heads.

· Employees - When an employee thinks his/her position is not in the right class, the employee should request that the supervisor conduct a review of the duties of the position. The request should include a Statement of reasons for believing the job classification is wrong. It should be reviewed by the supervisor and agency head or the representative of the agency head and if the request seems justified, the agency head should submit it, along with comments, to the HR DEPT. The position will then be studied to determine if the classification should be changed.

· Supervisors and DEPT DEPT Heads - A major responsibility for the classification plan rests with line management - DEPT heads and supervisors. They are responsible for determining the duties and responsibilities of positions, for assigning individual employees to work and informing them of their assigned duties, and for reporting changes in duty assignments and organization and the need for classification action to the HR . These are integral parts of their general responsibility for efficient and economical management

================================================== =================================



REGARDS

LEO LINGHAM

From India, Mumbai
Suliman
Hi guys,
This is my first time designing a position management Plan.
Attached is a draft that I came withan and I really need your feedback and input. Thank you all.
You can email me your feedback to
Sincerely,
Suliman

From United States
Attached Files (Download Requires Membership)
File Type: ppt position_management_plan_draft_133.ppt (135.5 KB, 375 views)

Suliman
Hello LEO,
This is very helpful information. We did make a presentation to MGM explaining some of the key functions you put here (.i.e position management, role of MGM, role of HR etc).
What I am doing right now is follow that explains what we need from the departments that shows their position management plan.
It is a follow-up to the presentation and telling them what to submit and in what format Thank you

From United States
Community Support and Knowledge-base on business, career and organisational prospects and issues - Register and Log In to CiteHR and post your query, download formats and be part of a fostered community of professionals.





Contact Us Privacy Policy Disclaimer Terms Of Service

All rights reserved @ 2024 CiteHR ®

All Copyright And Trademarks in Posts Held By Respective Owners.